Nexans Electric Floor Heating Cables provide the comfort of warm floors for your Home.

These thick cables are triple insulated and WaterPROOF for all indoor applications and have been manufactured since the 1930s; they were good then and they are even better today!

Ideal for placement on most any subfloor within your thick set mortar bed for any tile or stone installation. The insulation is so well constructed they can be installed WITHIN a concrete slab to provide for all of your floor heat needs, including warm tile, carpet warming, wood or laminate floor heating, vinyl and linoleum, etc.

Choose from several sizes below in 120 or 230 Volts. These are Standard sizes available from stock immediately. Standard sizes are for use inside structures and can generate up to 15 watts per Square Foot (51 BTUs per SF per Hour) depending on how close you space the cables.

All Stock cables have a 7 foot cold lead for connection to the automatic programmable thermostat with built in GFCI protection and a timer with temperature control. You start and end the cable at the thermostat location, within one or two feet so the power lead can make it up the wall to the thermostat (or you can use a junction box). We recommend the SunStat PRO Thermostat for Indoor applications.

The Cold lead is the first 7 feet, and its starting point is identified by the word “splice” printed right on the outer blue jacket of the cable.

Custom cables can also be manufactured in 1 week in lengths up to 1000 feet for larger indoor floor heating applications but usually our STOCKED standard sizes will work well for your heated floor application.

Nexans Indoor Floor Heating Cables Installation Instructions

Nexans 30 Year Warranty read it here

---

For OUTDOOR applications, please contact us for a quote and be prepared to provide us with details about your application, including your zip code, type of material (concrete, pavers, asphalt), application (driveway, tire tracks, patio, stairs), measurements, available power (120, 208, 220, 230, 240, 277, 480 VAC) and any other relevant information.

Download the Nexans Outdoor Quote Form Here

We can custom manufacture cables for all your Snow & Ice melting or Outdoor needs in 2 to 5 DAYS; That is right — DAYS not weeks.

Nexans Outdoor Snow and Ice Melting Cables Installation Instructions

Snow & Ice melting controls and contactors — see them here

Wiring Instructions for Outdoor Controls & Contactors

To maintain the UL Listing of your NEXANS snow & Ice melting system, you MUST choose from our control panel offerings. It simply isn’t practical or safe to attempt to control your new NEXANS system with switches, timers or contactor panels of your own assembly. Our solutions MAINTAIN your UL listing, are safe, Economical, Professionally factory assembled, and matched to your project. We WILL NOT sell Outdoor Cables without Our Controls; Your Safety is too important.