FREE SHIPPING on all orders over $149. Click here to learn more

DITRA-HEAT Cable 11 Sq Ft 120V

SKU DHEHK12011-1

More Views

Accessories required for proper installation.

Suggested quantities have been selected for you.

Product Name Unit Price Qty
DITRA-HEAT Cable • 11 sq Ft (120V)

Regular Price: $218.20

Special Price $196.38

DITRA-HEAT Membrane Sheet 3' 3" x 2' 7" = 8.6 sq ft

Regular Price: $21.76

Special Price $19.58

FREE Shipping

This item is eligible for FREE standard shipping!


DITRA-HEAT Cables are designed to be installed with DITRA-HEAT uncoupling membrane at 3-stud spacing, which will generate about 12.75 Watts per square foot.

The twisted pair design of this heating cable creates an EMF-canceling effect and eliminates the need for a return run back to the thermostat. 10 Year Manufacturer Warranty • Manufactured by Schluter Systems


 IMPORTANT Information

•  Do not purchase a heating cable the same size as the area to be tiled; this will be too much heating cable!

•  Never CUT the heating cable. This would change the cable resistance and could lead to a fire.




UPC 4011832146169
Voltage 120 VAC
Watts Per SF 12.75
Heat Output BTUs per SF 43.5
Manufacturer Schluter Systems
Brand Name DITRA
Power Lead Type Armored, NEC color code, Single point connection at 1 corner of mat. No return wire like inferior products
Power Lead Length 10 ft
Power Lead Wire Gauge 18 AWG
Heating Wire Spacing 3 stud
Controls/Thermostat is required for operation Yes
Conduit required for Power Leads Yes
Instructions + Video

Instructions + Video

Instruction Manual
Install Steps

Running cable is more difficult/time consuming than installing mats. 

Installation Steps:

All substrates must be clean, even, and load bearing. Bond inhibiting surfaces must be removed prior to the application of DITRA-HEAT.

Note: Minimum tile or stone format is 2" x 2" (5 cm x 5 cm).

For complete installation guidelines and warranty criteria, please refer to the downloadable Instruction Manual or scroll to the bottom of this page to view the installation video.

Skill Level All electric connections must be made according to the electrical and building codes effective in your region. An electrician is recommended.
Maximum Circuit Load 16
Maximum Circuit Overload Protection 20 Amp Breaker
Full Length End-to-End ground wire Yes
Heating Wire Dual Wire
Repairable Heating Wire Yes
Installation Layout Map customized for my project No - example in manual. We only provide Layout Maps for SunTouch Mats
Expected Floor Temperature This is dependent on many factors. A well-insulated floor can ensure better performance.
Insulation Recommended No, insulation not recommended under DITRA-HEAT Membranes.
Indoor / Outdoor INTERIOR floor heating application only. Embedded in mortar or self leveler only
Distance from Wax Ring at toilet flange 6 inches
Cut Warning Never cut or shorten the cable.
More Details

More Details

What's In The Box (1) 10.7 sq ft 120V cable, (1) sensor wire
Warranty from Manufacturer 10 Years
Custom Size Options Custom sizes not available.
Safety Listing Listed under CAN/CSA-C22.2 No. 130-03.
Acceptable Floor Coverings Tile, Natural Stone
Made In USA No

Have a question?

Check out our Knowledge Center

or give us a call!


Mon - Fri 6:30am to 5:00pm PST