Warm Your Floor™

Nexans Floor Heat Cable 120v – 96 Ft Long Heats 34-41 Sq Ft

admin — Wed, 03 Mar 2010 22:51:11 +0000

Nexans TXLP 500 Watt Floor Heat Cable 120v requires 4.2 amps

96 Ft Long to Heat 34-41 Sq Ft (depends on spacing) Closer spacing means more heat and faster warm-up time. National Electric Code allows a MAXIMUM of 15 watts per Sq Ft for Indoor floors. So the lowest value Cannot be exceeded. A cable that covers 34-41 SF CANNOT be installed in a 25 Sq Foot area, as this would exceed the allowable Watts per Sq Ft (500 watts divided by 25 SF = 20 watts per SF)

Additional Information

More Nexans Information

More Images:

$249.29

Nexans Floor Heat Cable 120v – 60 Ft Long Heats 25-33 Sq Ft

admin — Wed, 03 Mar 2010 22:49:37 +0000

Nexans Floor Heat Cable 1...

Nexans TXLP 300 Watt Floor Heating Cable 120v requires 2.5 amps

60 Ft Long to Heat 25-33 Sq Ft (depends on spacing) Closer spacing means more heat and faster warm-up time. National Electric Code allows a MAXIMUM of 15 watts per Sq Ft for Indoor floors. So the lowest SF value Cannot be exceeded. A cable that covers 25-33 SF CANNOT be installed in a 15 Sq Foot area, as this would exceed the allowable Watts per Sq Ft (300 watts divided by 15 SF = 20 watts per SF)

Additional Information

More Nexans Information

More Images:

$187.21

Nexans Floor Heat Cable 120v – 204 Ft Long Heats 86-105 Sq Ft

admin — Wed, 03 Mar 2010 22:48:20 +0000

Nexans Floor Heat Cable 1...

Nexans TXLP 1060 Watt Floor Heating Cable for 120v requires 8.8 amps

204 Ft Long to Heat 86-105 Sq Ft (depends on spacing) Closer spacing means more heat and faster warm-up time. National Electric Code allows a MAXIMUM of 15 watts per Sq Ft for Indoor floor heating. So the lowest SF value Cannot be exceeded. A cable that covers 86-105 SF CANNOT be installed in a 53 Sq Foot area, as this would exceed the allowable Watts per Sq Ft (1060 watts divided by 53 SF = 20 watts per SF = too much!)

Additional Information

More Nexans Information

More Images:

$369.57

Nexans Indoor Heating Cables

admin — Wed, 03 Mar 2010 22:42:14 +0000

Nexans Electric Floor Heating Cables provide the comfort of warm floors for your Home.

These thick cables are triple insulated and WaterPROOF for all indoor applications and have been manufactured since the 1930s; they were good then and they are even better today!

Ideal for placement on most any subfloor within your thick set mortar bed for any tile or stone installation. The insulation is so well constructed they can be installed WITHIN a concrete slab to provide for all of your floor heat needs, including warm tile, carpet warming, wood or laminate floor heating, vinyl and linoleum, etc.

Choose from several sizes below in 120 or 230 Volts. These are Standard sizes available from stock immediately. Standard sizes are for use inside structures and can generate up to 15 watts per Square Foot (51 BTUs per SF per Hour) depending on how close you space the cables.

All Stock cables have a 7 foot cold lead for connection to the automatic programmable thermostat with built in GFCI protection and a timer with temperature control. You start and end the cable at the thermostat location, within one or two feet so the power lead can make it up the wall to the thermostat (or you can use a junction box). We recommend the SunStat PRO Thermostat for Indoor applications.

The Cold lead is the first 7 feet, and its starting point is identified by the word “splice” printed right on the outer blue jacket of the cable.

Custom cables can also be manufactured in 1 week in lengths up to 1000 feet for larger indoor floor heating applications but usually our STOCKED standard sizes will work well for your heated floor application.

Nexans Indoor Floor Heating Cables Installation Instructions

Nexans 30 Year Warranty read it here

For OUTDOOR applications, please contact us for a quote and be prepared to provide us with details about your application, including your zip code, type of material (concrete, pavers, asphalt), application (driveway, tire tracks, patio, stairs), measurements, available power (120, 208, 220, 230, 240, 277, 480 VAC) and any other relevant information.

Download the Nexans Outdoor Quote Form Here

We can custom manufacture cables for all your Snow & Ice melting or Outdoor needs in 2 to 5 DAYS; That is right — DAYS not weeks.

Nexans Outdoor Snow and Ice Melting Cables Installation Instructions

Snow & Ice melting controls and contactors — see them here

Wiring Instructions for Outdoor Controls & Contactors

To maintain the UL Listing of your NEXANS snow & Ice melting system, you MUST choose from our control panel offerings. It simply isn’t practical or safe to attempt to control your new NEXANS system with switches, timers or contactor panels of your own assembly. Our solutions MAINTAIN your UL listing, are safe, Economical, Professionally factory assembled, and matched to your project. We WILL NOT sell Outdoor Cables without Our Controls; Your Safety is too important.

Nexans Floor Heat Cable 120v – 141 Ft Long Heats 51-65 Sq Ft

admin — Wed, 03 Mar 2010 22:37:55 +0000

Nexans Floor Heat Cable 1...

Nexans TXLP 730 Watt Floor Heating Cable for 120v requires 6.1 amps

141 Ft Long to Heat floors of 51-65 Sq Ft (depends on spacing) Closer spacing means more heat and faster warm-up time. National Electric Code allows a MAXIMUM of 15 watts per Sq Ft for Indoor floors. So the lowest value Cannot be exceeded. A cable that covers 51-65 SF CANNOT be installed in a 37 Sq Foot area, as this would exceed the allowable Watts per Sq Ft (730 watts divided by 37 SF = 20 watts per SF)

Additional Information

More Nexans Information

More Images:

$300.70

SunTouch® ProMelt™ Mats

admin — Wed, 03 Mar 2010 06:14:21 +0000

Pro Melt Outdoor Snow and Ice Melting Mats and Cables

Pro Melt Mats are an efficient and convenient way to eliminate snow and ice accumulation on stairs.

ProMelt™ Snow and Ice melting cables in 42 length options are a lower cost solution for Snow & Ice Melting than the easier to install ProMelt MATS. ProMelt Electric Radiant Heat cables for outdoor installation eliminate Heated Driveways, Heated Walkways and heated sidewalks are safer and can be automated for your convenience.

ProMelt Cables are Made in America and are ideal for odd shaped areas. With more sizes than anyone our world-class snow melting cable is constructed with top quality insulation and wire material to ensure job-site durability, safety, and long life. A 20′ grounded power lead is standard on every ProMelt Cable to reach your power connection and since ProMelt uses the Dual Wire technology invented by SunTouch there is NO return wire from the end of the cable for the most and easiest layout options.

Each cable will heat a driveway or walkway of between 8 and 150 Sq Ft; multiple cables can be combined by running them in parallel to the control panel or by using junction boxes. Offered in 240 (most popular), 120, 208 or 277 VAC options we have more choices than any other manufacturer.

The ProMelt Snow and Ice melting system for all your walking surfaces is brought to you by SunTouch a division of Watts Radiant. SunTouch is the leader in Indoor Floor Heating and now offers the Number One solution for outdoors as well. Choose ProMelt made in America for American Homes.

ProMelt Mats in 2 & 3 Ft widths are the easiest solution for Snow & Ice Melting. ProMelt Electric Radiant Heat mats for outdoor installation provide Snow & Ice Melting. Heated Driveways, Heated Walkways & heated sidewalks are safe and economical.

Shop for ProMelt Below or open our quote form and let us assist you!

Helpful Links:

ProMelt Quote Form – complete online or print and fax

ProMelt Installation Instructions – PDF download

ProMelt Contactor Control Panel Instructions

Testimonials:

Satisfied heated floor customers – Click here to read

Helpful FAQs – Click here to read

HeatTrak SnowMelt Rubber Stair Treads 240v

admin — Wed, 03 Mar 2010 06:08:53 +0000

The Perfect Snow and Ice Melting Mats

The 240v Snow Melt Rubber Stair Treads are built with non-slip, UV protected rubber, and is designed to endure harsh wear. Due to its portability, the Snow Melt Rubber Stair Treads can be used in places where embedded snow melting systems cannot be installed.

With its low maintenance and portability the Snow Melt Rubber Stair Treads are in high demand by many leading industrial companies. The Snow Melt Rubber Stair Treads are affordable, portable, efficient and convenient way to eliminate snow and ice accumulation on driveways.

Testimonials

Thank you for your fast and honest answer.

- Lou P.

Read other Testimonials from Our Satisfied Customers – Click here to read

FAQ

These and other Questions are Answered in Our Helpful FAQ section – Click here to read

HeatTrak SnowMelt Aluminum Stair Treads 240v

admin — Wed, 03 Mar 2010 06:06:34 +0000

The perfect portable snow and ice removal systems for home owners and business owners.

Snow Melt Aluminum Stair Treads are made of extruded aluminum with abrasive filler to provide extra traction, and are designed to be left out for the entire year.
Snow Melt Aluminum Stair Treads will continuously melt snow and ice up to 274-300 Sq Ft using just 12-15 watts per Sq Ft.
Snow Melt Aluminum Stair Treads can be purchased and connected in groups of 2,3,4 or 5 and can be plug into a standard outlet with a single Equipment Leakage Circuit Interrupter (ELCI) plug.
Snow Melt Aluminum Stair Treads will put an end to the traditional methods of snow and ice removing such as shoveling, using chemicals, and snow blowing.

“Prevent potential accidents before they happen!”

Testimonials

Thank you for your fast and honest answer.

- Lou P.

Read other Testimonials from Our Satisfied Customers – Click here to read

FAQ

These and other Questions are Answered in Our Helpful FAQ section – Click here to read

HeatTrak SnowMelt Rubber Stair Treads 120v

admin — Wed, 03 Mar 2010 06:03:00 +0000

The Perfect Snow and Ice Melting Mats

120v Snow Melt Rubber Stair Treads are perfect for any surface. The ideal product for entrances, ramps, handicap-accessible structures, and many more. These affordable, portable, efficient snow and ice melting materials are the BEST way to eliminate snow and ice accumulation on your walkways.

Due to its portability, the Snow Melt Aluminum Stair Treads can be used in places where embedded snow melting systems cannot be installed. With its low maintenance and portability the Snow Melt Aluminum Stair Treads are in high demand by home owners.

Testimonials

Thank you for your fast and honest answer.

- Lou P.

Read other Testimonials from Our Satisfied Customers – Click here to read

FAQ

These and other Questions are Answered in Our Helpful FAQ section – Click here to read

HeatTrak SnowMelt Aluminum Stair Treads 120v

admin — Wed, 03 Mar 2010 06:00:31 +0000

The perfect portable snow and ice removal systems for home owners and business owners.

The 120v Snow Melt Aluminum Stair Treads are designed to endure extra heavy foot traffic.
The Aluminum Top Non-Slip Surface stair treads are designed to withstand extra heavy foot traffic around the factory. And can be laid over entrance ways, loading docks, sidewalks, handicap ramps, aisles, corridors and keeping all types of surfaces constantly clean, clear, and safe.
Snow Melt 120v Aluminum Stair Treads can be purchased and connected in groups of 2,3,4 or 5 and can be plug into a standard outlet with a single Equipment Leakage Circuit Interrupter (ELCI) plug.
Snow Melt Aluminum Stair Treads will put an end to the traditional methods of snow and ice removing such as shoveling, using chemicals, and snow blowing.

“Prevent potential accidents before they happen!”

Testimonials

Thank you for your fast and honest answer.

- Lou P.

Read other Testimonials from Our Satisfied Customers – Click here to read

FAQ

These and other Questions are Answered in Our Helpful FAQ section – Click here to read