Save valuable time on your electric floor heating installation!
SunTouch’s open-weave mesh TapeMat can be installed in one day. There’s no need to wait for mortar to cure overnight before laying tile.
You can achieve warm floors in four easy steps. Simply urnroll and attach your mat(s), secure the floor sensor (comes with all SunTouch thermostats), apply thin-set mortar, and install your flooring.*
• Edged with double-sided tape for fast & easy installation that adheres directly to your subfloor.
• Mortar bonds easily through mesh with the underlying material.
• Only 1/8" added floor thickness compared to typical tile installations
• Easily adjusted to accommodate curves, angles, and cut-outs
• Can be trimmed & flipped to accommodate your layout (only along orange mesh)
• Also available in 2' & 3' wide rolls
*After installing your floor heating system and new flooring, please wait 28 days for the mortar to cure completely before having the thermostat connected & turning the system on.
- More Details
Manufacturer Watts Radiant Warranty 25 year warranty backed by USA Manufacturer since 1873 Layout Flexibilty Yes Thermostat Control Required? SunStat Floor sensing thermostat Conduit Required? Conduit does make installation easier in new construction (not required) Power Lead Type Armored, NEC color code, Single point connection at 1 corner of mat. No return wire like inferior products Why Helps
SunTouch = Zero EMF
An emerging issue in the electric radiant heat industry is EMF (electromagnetic field) radiation. SunTouch pioneered and sells only ZERO EMF products constructed with active dual wire EMF-canceling technology.
All SunTouch products use a complex wire construction with two heating elements in parallel with an added and patented helical twist to eliminate EMF. Other electric radiant floor heating companies sell single-wire systems that release high levels of EMF when compared to SunTouch.
What is EMF? Electromagnetic fields (EMF) come from all electrical appliances, but studies show an average American's daily exposure is less than 1 unit (mG) of EMF. But. when you sit on an unshielded electric radiant floor, you may be exposed to 20, 40, or more times the average daily exposure. This Data comes from Independent testing. Read More Here
Is limiting exposure to EMF important? No one is certain. The World Health Organization says the data is inconclusive to date, but continues their research. We provide this EMF information because it is important to some people, not to frighten you or exaggerate any risk.
For many years customers have chosen SunTouch Zero EMF systems, but we leave the choice to you after explaining what we do know.
Wire Construction ETFE Fluoropolymer, metal shield and Outside layer of PEX Minimum Bend Radius 1 inch Acceptable Sub-Floors on TOP of Sub Floor (Plywood, backer board, concrete) Shower Installation Yes, can be installed in a tiled shower. UL listed, verify local code. Indoor/Outdoor? INTERIOR floor heating Application only. Embedded in Mortar or self leveling concrete only Total Watts 960 watts Custom Size Options None. Standard Mats only. Repair Information Yes, Wire can be repaired. Repair kits and assistance available Safety Listing UL (Underwriters Laboratory) Listed for U.S. and Canada under UL 1673 and CAN/CSA C22.2 No. 130-03, File No. E185866 Acceptable Floor Coverings Natural Stone,Tile, Laminate, Engineered Woods, Carpet, Vinyl, Linoleum, Solid Hardwood (if you use sleepers) EMF (Electro Magnetic Field) Yes. Verified by Independent Testing Laboratory as ultra low. REET test
Voltage 240 VAC Size in Feet 2.5' x 32' (2.5x32 feet) Size in Inches 30" x 384" (30x384 inches) Size in Meters 0.76m x 9.75m (0.76x9.75 meters) Thickness 0.122 (less than 1/8") Amp Draw 4 Wattage per SF 12 Watts per Sq Foot Heating Power Output per Hour 41 BTU per Sq Ft/Hour Heating Power Output Total 3280 BTU total Power Lead Length 10 Feet Power Lead Wire Gauge 18 AWG Spacing of Heating Wire 2.50 inches Resistance Value 51-64 ohms
- Instructions + Video
Instructions + Video
Instruction Manual SunTouch 24003230ST Mat 240V 30"x 32' 24003230 Installation Manual VIDEO Skill Level Installation only by qualified persons. Electrician recommended for wiring. Read More Distance from Toilet Install 4 - 6 inches away; can be under front of toilet. Approx 20" from wall Electrical Box Size Extra-deep single-gang box for 1 or 2 leads, Or 4" square deep box for 3 cables (extra room needed for Wire, wire nuts, control) GFCI / GFEP Protection Required for each circuit. Built-in to all SunTouch SunStats. Power Supply & Wiring Mats or Wire Supply Wire Breaker VAC total amps (AWG*) qty type rating 120 up to 12 amps 14 1 single pole 15 or 20 A 120 up to 15 amps 12 1 single pole 20 A 240 up to 12 amps 14 1 double pole 15 or 20 A 240 up to 15 amps 12 1 double pole 20 A
* Recommended only. Follow local codes for wire gauge size.
Maximum Circuit Overload Protection 20 A Breaker Maximum Circuit Load 15 Amps Minimum Install Temperature 50 Degrees F / 10 Degrees C
You might also like...
HeatTrak 20" x 60" • Residential Heated Walkway power cord sold separately (HR20-60)
You Save: $20.00
KERDI-SHOWER-KIT 32" x 60" Centered Stainless Steel Drain with PVC Flange
You Save: $56.99
HeatTrak 10" x 30" • Residential Heated Stair Mat - power cord sold separately (HR10-30)$69.99
SunStat Connect WiFi Enabled Programmable Thermostat$270.00