Note : NOT for 120v use
This is the 240V version of the HeatTrak Power Unit for use with Commercial Industrial Stair Mats. The HR-PB ELCI Power unit is rain proof with a patented watertight connector on one end and a NEMA6-15 grounded plug on the other end. In between the connectors is the GFCI safety device with Test and Reset buttons and an LED indicator light. The 6 foot cord is long enough for most applications and connects to the first or last mat in your set. The HR-PB is not compatible with Residential products which are 120v only.
Powering HeatTrak Industrial Commercial Stair Mats: A power unit with pre-attached 6' cord must be purchased or your mats will not work. 240V Power Unit (HR-PB) contains its own ELCI – Equipment Leakage Circuit Interrupter; 30mA trip level, plug type NEMA6-15.
One power unit is required for each continuous connected set of HeatTrak Industrial Snow-Melting Stair Mats.
Brand Name HeatTrak Power Lead Length 6 Ft Packaging Frustration-Free Cardboard
- Instructions + Video
Instructions + Video
Instruction Manual HeatTrak HR-P HR-P Heated Stair Mat GFCI Power Unit With 6-Foot Power Cord Installation Manual Install Steps Read enclosed manufacturer instructions. Connect all mats together first. Connect power unit to stair mat closest to outlet Plug power unit cord into outlet Test Unit Skill Level Easy, plug and play installation GFEP / GFCI Protection (Ground Fault Circuit Interrupter) see instructions Maximum Circuit Load 13 Amps
- More Details
What's In The Box power unit only Warranty from Manufacturer 2 years Amp Draw 15 A Max Repairable Heating Wire No-replace Video
They were very easy to install and worked wonderfully well all winter.Fortunately for me, last year my daughter-in-law had bought six Warm Your Floor treads for the steps which lead to my porch in the front of the house. They were very easy to install and worked wonderfully well all winter. So this winter I bought four orders (3 treads in each) to cover the back stairs in my house. That part of the house gets...