HeatTrak Industrial Snow Melting Heated Walkway Mats provide snow free sidewalks
HeatTrak® Industrial Snow-Melting Walkway Mats are engineered to prevent snow and ice accumulation on walkways that have our electrically heated mats. The mat plugs into any standard 120V or 240V outlet (you choose) generating heat to melt snow at a rate of 2" per hour. These Heavy Duty Industrial Quality mats are built with flame retardant reinforced SBR rubber, have excellent traction, are a durable 1/2 inch thick and designed to spend all winter outdoors.
Place HeatTrak Mats for heated walkways, at entrances, porches, stair landings, loading docks, handicap ramps, rooftops, and most other surfaces, to provide a clean and safe passageway for foot traffic or wheelchair access. Durable for all foot traffic but you cannot drive on them.
Each HeatTrak Commercial walkway mat INCLUDES a pre-attached Power Unit with a 6 Ft cord to connect directly to an electrical outlet (120v and 240v available). The mats do not connect together like stair mats or Residential mats; each connects directly to an outlet. Industrial Commercial mats do NOT connect to residential products.
120V mats 30 SF and less have a power unit with a GFCI – Ground Fault Circuit Interrupter; 6mA trip level. Larger than 30 SF 120v and all 240v mats have an ELCI – Equipment Leakage Circuit Interrupter; 30mA trip level. 240v mats have plug type NEMA6-15 and 120v have plug type NEMA5-15 (standard 3-prong plug).
EFFICIENT operation costs as little as 60 cents a day (depending on kilowatt hour cost and size of mat). POWERFUL 35-40 watts per Sq Ft is equivalent to many permanent installations and built-in Ground Fault Protection is built-in to each power unit cord.
All Commercial Industrial Mats have a 2 year warranty and ship in 3-10 Days, they may be in stock, but are typically made to order.
HEATTRAK MATS ARE FOR SNOW MELTING ONLY; NEVER COVER MATS; DO NOT USE INDOORS; DO NOT USE INSIDE PET HOUSES
Voltage 120 VAC How to choose 120 or 240 Volt Most customers choose 120v Watts Per SF 35-40 Heat Output BTUs per SF 120+ Manufacturer Heat Trak, LLC Brand Name HeatTrak Power Lead Type Purchase power unit separately Thickness 0.5" in. inches Controls/Thermostat is required for operation Yes, Power unit required Length of heating area Feet 20' ft. feet Width of heating area Inches 24 Length of heating area Inches 240
- Instructions + Video
Instructions + Video
Instruction Manual HeatTrak SMM24-20 SnowMeltMat 2' x 20' 120v Installation Manual Skill Level Easy, plug and play installation Maximum Circuit Load 13 Amps GFEP / GFCI Protection (Ground Fault Circuit Interrupter) Yes Do Not Install in other surfaces Not for composite decks
- More Details
Warranty from Manufacturer 2 years Amp Draw 10.8 Heated Area $40.00 Total Watts 1,296 Custom Size Options Yes, custom lengths in widths of 11,24,36,48 inches only Safety Listing HR-P power unit UL Listed Repairable Heating Wire No