Nuheat standard size pre-built floor heat mats come ready to fit the room and will keep almost any flooring at a warm and comfortable temperature that you set on the Nuheat thermostat control.
You can use more than one Nuheat mat combined to fit any room size or shape, up to the amp limit of the thermostat (150 SF for 120v / 300 SF for 240v Mats). All Mats connect to the Thermostat, not to each other.
Nuheat mats are like electric blankets - you choose the size or sizes to cover your desired floor area - or ask for our expert assistance at NO OBLIGATION. The mats cannot be cut or altered - so choose the right size - we can help.
Voltage 240 VAC Amp Draw 1.4 Watts Per SF 12 Watts per Sq Foot Total Watts 336 watts Heat Output BTUs per SF 41 BTU per Sq Ft/Hour Heating Power : Total BTU's 1148 BTU total Manufacturer Pentair Length of heating area Feet 14' ft. feet Length of heating area Inches 168" in. inch Width of heating area Inches 24" in. inch
- Instructions + Video
Instructions + Video
Instruction Manual Nuheat SL2M014002 Mat 14'x2' 240V 1.4A Installation Manual Video Install Steps
Nuheat mats are squares and rectangles in over 120 sizes and will fit any room regardless of shape or size. When installing your floor, the heating mats are set in a thin spread of mortar (the same bonding materials used to lay your tile floor). Once your subfloor is prepared, and you have installed the Nuheat mat, apply another layer of thinset or mortar, lay your tile as usual and make the final connection to the Nuheat Thermostat control.
Laminate & Engineered Hardwood: simply install the Nuheat mat as above. Next, cover the Nuheat mat with at least 1/4 inch mortar or floor leveling cement. Once the mortar has cured, install your floor according to the flooring manufacturer's instructions.
- More Details
Warranty from Manufacturer 25 year warranty Heated Area $28.00 Size in Inches 24" x 168" (24x168 inches) Size in Feet 2' x 14' (2x14 feet)