FREE SHIPPING on all orders over $149* (exclusions apply) See Details

Nuheat Mat • 168" x 140 (240V)

SKU# G168140

Retail: $1,829.88

You Save: $215.88

$1,614.00

FREE Shipping

This item is eligible for FREE standard shipping!

Details

Nuheat standard size pre-built floor heat mats come ready to fit the room and will keep almost any flooring at a warm and comfortable temperature that you set on the Nuheat thermostat control.

You can use more than one Nuheat mat combined to fit any room size or shape, up to the amp limit of the thermostat (150 SF for 120v / 300 SF for 240v Mats). All Mats connect to the Thermostat, not to each other.

Nuheat mats are like electric blankets - you choose the size or sizes to cover your desired floor area - or ask for our expert assistance at NO OBLIGATION. The mats cannot be cut or altered - so choose the right size - we can help.

Installation Demo

Specifications

Specifications

UPC 620713010112
Voltage 240 VAC
Amp Draw 8.2
Wattage per SF 12 Watts per Sq Foot
Total Watts 1960 watts
Heating Power Output per Hour 41 BTU per Sq Ft/Hour
Heating Power Output Total 6888 BTU total
Power Lead Type TEW Wire with Stainless Steel ground braid rated to 105 C and 300v max.
Power Lead Length 10 Feet
Power Lead Wire Gauge 18 AWG
Thickness Mat is .083, total is 1/8" with thinset underneath.
Full Length End-to-End ground wire Yes.
Spacing of Heating Wire 2.0" inches
Minimum Bend Radius 0.625" inch
Resistance Value 28 - 32 ohms
Thermostat Control Required? Nuheat Floor sensing thermostat
Conduit Required? Nuheat mats require conduit
Instructions + Video

Instructions + Video

Instruction Manual
VIDEO
Install Steps

Nuheat mats are squares and rectangles in over 120 sizes and will fit any room regardless of shape or size. When installing your floor, the heating mats are set in a thin spread of mortar (the same bonding materials used to lay your tile floor). Once your subfloor is prepared, and you have installed the Nuheat mat, apply another layer of thinset or mortar, lay your tile as usual and make the final connection to the Nuheat Thermostat control.

Laminate & Engineered Hardwood: simply install the Nuheat mat as above. Next, cover the Nuheat mat with at least 1/4 inch mortar or floor leveling cement. Once the mortar has cured, install your floor according to the flooring manufacturer's instructions.

Skill Level Installation only by qualified persons. Electrician recommended for wiring.
Maximum Circuit Load 15 Amps
Maximum Circuit Overload Protection 20 A Breaker.
GFCI / GFEP Protection Required for each circuit. Built-in to all Nuheat thermostats.
Electrical Box Size Extra-deep single-gang box for 1 or 2 leads, Or 4" square deep box for 3 cables (extra room needed for Wire, wire nuts, control). Harmony requires 4" box.
Shower Installation Yes, can be installed in a tiled shower.
Layout Flexibilty Yes. Contact us for more information.
Expected Floor Temperature This is dependent on many factors. A well-insulated floor can ensure better performance.
Insulation Recommended Yes; under slabs or framed floors. Cork or similar on top of Concrete Subfloor as thermal break
Indoor/Outdoor? INTERIOR floor heating Application only. Embedded in Mortar only
Acceptable Sub-Floors On TOP of Sub Floor (Plywood, backer board, or concrete)
Distance from Toilet Install 4 - 6 inches away; can be under front of toilet. Approx 20" from wall
Trowel Size recommended minimum 3/8" x 1/4". Works for most ceramic tile; verify with tile/mortar manufacturer
Trowel type Recommended Heavy Duty Plastic PRO-Trowel
Cut Warning No. Never cut the heating elements to shorten
Minimum Install Temperature 50° Degrees F / 10° Degrees C
More Details

More Details

What's In The Box Nuheat Mat, Complete instructions. Installation videos online.
Warranty 25 year warranty
Wire Construction Copper/Copper Alloy Heating wire insulated with ETFE and surrounded with protective Stainless steel ground shield.
Size in Inches 168" x 140" (168x140 inches)
Size in Feet 14' x 11.67' (14x11.67 feet)
Size in Meters 4.27m x 3.56m (4.27x3.56 meters)
Custom Size Options Yes, custom mats available upon request
Safety Listing UI (US) 1693; UL (CAN/CSA) C22.2 #217; NEC Article 424 Floor Warming Systems
Repair Information Yes, Wire can be repaired. Repair kits and assistance available.

You might also like...

  1. KERDI-DRAIN KIT with 2" PVC Flange & 4" Stainless Steel Grate

    KERDI-DRAIN KIT with 2" PVC Flange & 4" Stainless Steel Grate

    Leave the First Review

    Retail: $126.80

    You Save: $12.68

    $114.12

    Learn More
  2. HeatTrak 20" x 60" • Residential Heated Walkway power cord sold separately (HR20-60)

    HeatTrak 20" x 60" • Residential Heated Walkway power cord sold separately (HR20-60)

    (3)

    Retail: $189.95

    You Save: $20.00

    $169.95

    Learn More
  3. KERDI-SHOWER-KIT 32" x 60" Centered Stainless Steel Drain with PVC Flange

    KERDI-SHOWER-KIT 32" x 60" Centered Stainless Steel Drain with PVC Flange

    Leave the First Review

    Retail: $569.94

    You Save: $56.99

    $512.95

    Learn More
  4. HeatTrak 10" x 30" • Residential Heated Stair Mat - power cord sold separately (HR10-30)

    HeatTrak 10" x 30" • Residential Heated Stair Mat - power cord sold separately (HR10-30)

    (4)
    $69.99

Have a question?

Check out our Knowledge Center

or give us a call!

1-866-558-3369

Mon - Fri 6:30am to 5:00pm PST