WarmWire Strap is used to hold WarmWire in place on the floor at the spacing you choose.

All 3 spacing options can be maintained with this strap (2, 2.5 or 3 inches). Anchor the strap to the subfloor at 3 to 4 foot intervals across the floor. Cut the strap to length using ordinary snips.

You can anchor the strap with Screws on plywood or backer board and with spray glue, hot glue or 2-sided tape on concrete. Order 1 roll of strap for each 40 to 50 Square Feet of WarmWire to be installed The proper amount of strap is included if you buy a WarmWire KIT.

Additional Information:

See WarmWire Install Manual