ProMelt Snow Melting Cable

Write the first review
SKU: ProMelt Snow Melting Cable
Need help selecting voltage or coverage area? Take a look at our Quick Guide

ProMelt electric radiant snow melting cables are the most versatile and lowest cost option for snow melting installation any size, any shape - quickly providing electrically heated walkways and driveways. Cables are ideal for steps, curved or angled areas. Cables can be used for simple rectangular areas too, but mats install faster and easier in those situations.

Environmentally friendly snow and ice removal in the worst conditions is possible without using salt or hazardous chemicals. ProMelt provides energy efficiency and easy installation.

ProMelt heated snow melting cables are manufactured by SunTouch Watts Radiant (pioneers of indoor radiant heat). You choose your configuration and secure to rebar/mesh or using our Cable Strap on a base surface; maintaining the proper and consistent spacing of cables is your job. Larger spacing means less heat but more coverage per cable.

Cables cost 10-15% less than mats and give you layout and heat output options since you control the spacing and determine the layout. Consider ProMelt Mats for a quicker and easier installation (the spacing is already done for you) for just a few dollars more. (See Specifications)

ProMelt is an effective, reliable and invisible snow melting system that will serve you for many years. Projects of 350 SF or less require cables and a snow sensor-controller and are very affordable and convenient.

ProMelt Snow Melting Benefits:

  1. ProMelt cables provide versatility and allow you to control the Watts per Sq Foot between 38 and 50.
  2. Automatically activates only when needed means your driveway and sidewalks stay clear and you never forget to turn the system off.
  3. No plowing or scraping means your walkway and driveway look better and last longer
  4. Maintenance Free permanent installation. Not like Hydronic systems (water) with pumps, boilers, etc
  5. Increase safety and reduce liability with ProMelt
  6. No hazardous chemicals to damage your landscaping or the environment
  7. No waiting for the plow or shovel to arrive - Dependable automatic snow sensor once moisture and temperature conditions are met activates ProMelt.
  8. Save Money - Eliminate snow removal labor costs
  9. The best construction using premium materials means ProMelt is built to last
  10. Increase the value of your home with an automatic ProMelt System

Instructions + Video

National Electric Code reference

ANSI/NFPA 70 especially Article 426. Plus any local code requirements

Maximum exposure temperature

285°F (140°C) Short-term max. for asphalt covering

Minimum Installation Temperature

40°F (4.5°C)

Maximum Circuit Load

30 or 50 Amps @ 240v, depending on controls chosen

Maximum Circuit Overload Protection

70 A Breaker.

Recommended Method and Depth for Asphalt

Attach ProMelt over cooled asphalt base layer- Cover with hand shoveled final asphalt layer min 1.5 inch thick-DO NOT DRIVE machines on exposed ProMelt. Roll with small roller or compactor. - See Installation Manual

Recommended Method and Depth for Slab

Use Chairs/dobies so rebar/Mesh ProMelt is attached to is in top 2" of slab - See Installation Manual.

Recommended Method and Depth for Pavers in sand

Minimum 1.5 inches sand over cables, max paver thickness of 2.50 inches - See Installation Manual

Recommended Method and Depth for Pavers in Concrete

Maximum 2.50" total thickness over cables - See Installation Manual

Spacing of attachment to Mesh/Rebar or surface

Every 24" using cable ties (no metal)

Recommended Method and Depth for Tile/Stone

See Installation Manual and TCNA guidelines; 1.25 inch minimum

Minimum Depth

1.50" inches below top of heated surface-completely covered : See Installation Manual

Distance from Edges of Concrete/Asphalt

Minimum 6" from edge of slab or 12" for asphalt without a curb

Specifications

UPC 840213099732
Heating Power Output Total 1360 BTU total
Heating Power Output per Hour (BTU) 170 BTU per Sq Ft/Hour
EMF (Electro Magnetic Field) Yes. Verified by Independent Testing Laboratory as ultra low.
Ohms Reading (resistance value) 31 - 39 ohms
Power Lead Wire Gauge 14 AWG
Power Lead Length 20'
Power Lead Type Armored, NEC color code, Single point connection at 1 corner of mat. No return wire like inferior products
Thickness 1/4"
Voltage 120 VAC
Wattage per SF 50
Spacing of Heating Wire 3" - 3.5" - 4" on center
Manufacturer Watts Radiant

More Details

Brand Name ProMelt
Canadian Electric Code reference Section 62 (CEC) Part I. Plus any local code requirements
National Electric Code reference ANSI/NFPA 70 especially Article 426. Plus any local code requirements
Safety Listing ETL Listed for U.S. and Canada under UL (Underwriters Laboratory) 515, IEEE 515.1, and CAN/USA C22.2 No. 130-03 : Listing file number: 3151992
Warranty from Manufacturer 10 year warranty backed by USA Manufacturer since 1873
What's In The Box ProMelt Cable in Easy to dispense spool. Detailed Installation Manual. DVD on request
Amp Draw 3.3
Wire Construction ETFE Fluoropolymer, Braided copper ground plane, Foil shield and Outside polyurethane jacket
Total Watts 400 watts at 3" spacing

Reviews

Write Your Own Review
You're reviewing: ProMelt · 35 Square Foot Snow Melting Cable (208V)
Loading...

You submitted your review for moderation.