DITRA-HEAT-DUO CONFIGURABLE KIT
Instructions + Video
Ensure your sub floor is clean, even, and load bearing. Bond inhibiting surfaces must be removed prior to the application of DITRA-HEAT. For complete installation guidelines and warranty criteria, please refer to the included instruction manual or at the link displayed above.
Note: Type, thickness, & format of the tile/stone covering must be at least 2" x 2" (5 x 5 cm).
ddFor INDOOR USE ONLY
15 amps
Specifications
Manufacturer | Schluter-Systems |
---|---|
Safety Listing | UL Listed |
Voltage | 120V |
Wattage per SF | 12.75 |
Spacing of Heating Wire | 3-stud and 3-2-3-2-stud spacing. (Tension loop can be made around a single stud if necessary. See installation handbook for details.) |
Thickness | ~ 0.25 inches |
More Details
Brand Name | DITRA-HEAT |
---|---|
Warranty from Manufacturer | 10-25 year limited manufacturer warranty |
Spacing between runs 1 | 3 stud spacing |
Spacing between runs 2 | 3-2-3-2 stud spacing |
Watts Per SF 1 | 12.7 |
Watts Per SF 2 | 15.2 |
BTUs/SF/Hr 1 | 43.2 |