The larger of the two Schluter Systems kits, this DITRA-HEAT Kit contains everything you need to install your DITRA-HEAT floor heating system:
• 1 DITRA-HEAT Cable - 37.5 sq ft
• 7 DITRA-HEAT Uncoupling Membrane sheets - 60.3 sq ft
(needed to install the cable)
• 1 DHERSD/BW Programmable Thermostat
(push button, non-touchscreen)
• 2 Sensor Wires
This is an all-inclusive package for one-stop shopping!
If you are looking for a kit in a different size or voltage, please don't hesitate to call.
UPC 4011832146152 Voltage 120 VAC Cable Length 124.1 Cable Length (inches) 1489.2 Cable Length (meters) 37.8 Watts Per SF 12.75 Heating Power : Total BTU's 1653 Manufacturer Schluter-Systems Power Lead Type Armored, NEC color code, Single point connection at 1 corner of mat. No return wire like inferior products Power Lead Length 10 ft Power Lead Wire Gauge 18 AWG Heating Wire Spacing 3 stud Controls/Thermostat is required for operation Yes Conduit required for Power Leads Yes
- Instructions + Video
Instructions + Video
Instruction Manual DITRA-HEAT Kit 60.3 sq ft 120V Install Steps
All substrates must be clean, even, and load bearing. Bond inhibiting surfaces must be removed prior to the application of DITRA-HEAT. For complete installation guidelines and warranty criteria, please refer to the downloadable Instruction Manual (↖ linked above) or to the installation video online.
Note: Type, thickness, and format of the tile or stone surface covering must be at least 2" x 2" (5 cm x 5 cm).
Skill Level Running Cable more difficult + more time than MATS. Installation only by qualified persons. Electrician recommended for wiring GFEP / GFCI Protection (Ground Fault Circuit Interrupter) Not Required Maximum Circuit Load 16 Maximum Circuit Overload Protection 20 Amp Breaker Full Length End-to-End ground wire Yes Heating Wire Dual Wire Repairable Heating Wire Yes Installation Layout Map customized for my project No - example in manual. We provide Layout Maps only for SunTouch Mats Expected Floor Temperature This is dependent on many factors. A well-insulated floor can ensure better performance. Insulation Recommended No, insulation not recommended under DITRA-HEAT Membranes. Indoor / Outdoor INTERIOR floor heating application only. Embedded in mortar or self leveler only Distance from Wax Ring at toilet flange 6 inches Cut Warning Never cut or shorten the cable.
- More Details
What's In The Box (1) 37.5 sq ft DITRA HEAT 120V Cable (DHEHK12038), 7 DITRA HEAT Membrane Sheets, 2 sensor wires, and 1 programmable thermostat Brand Name DITRA-HEAT Flooring Type Tile & Stone Warranty from Manufacturer 10 Years Heated Area Size Covered 38 Amp Draw 4 Total Watts 768.82 Custom Size Options Custom sizes not available. Safety Listing Listed under CAN/CSA-C22.2 No. 130-03. BTUs/SF/Hr 1 No alternate spacing options. BTUs/SF/Hr 2 43.5 BTUs/SF/Hr 3 No alternate spacing options. Spacing between runs 1 3 Studs Spacing between runs 2 No alternate spacing options. Spacing between runs 3 No alternate spacing options. Watts Per SF 1 12.75 Watts Per SF 2 No alternate spacing options. Watts Per SF 3 No alternate spacing options. Heated SF 1 37.5 Acceptable Floor Coverings Tile, Natural Stone Made In USA No
You might also like...
HeatTrak 10" x 30" • Residential Heated Stair Mat - power cord sold separately (HR10-30)$69.99
HeatTrak 20" x 60" • Residential Heated Walkway power cord sold separately (HR20-60)
You Save: $20.00
KERDI-SHOWER-KIT 32" x 60" Centered Stainless Steel Drain with PVC Flange
You Save: $56.99
KERDI-DRAIN KIT with 2" PVC Flange & 4" Stainless Steel Grate
You Save: $12.68
Love it in the cold winterCoolest stuff I've seen yet