WarmWire 70 Sq Ft 240V Radiant Floor Heating Cable

Item Number: 240070WD

Alternate Part Number: 240070R

MFR Part No: 81004593

Availability: In stock

$379.00

Be the first to review this product

Qty:

FREE Shipping

Enjoy FREE Standard Shipping for all orders over $149!

More Views

Product Information

SunTouch WarmWire is the affordable alternative to SunTouch Floor Heating Mats.

WarmWire floor heating cables are similar in construction and provide heat just like SunTouch mats, but install differently and cost less. Simply place and attach the WarmWire strap to the subfloor and weave the wire back and forth between straps to create your own heated area. Cover with thin-set or self-leveling mortar and finish with almost any floor covering. You weave the wire onto the subfloor while maintaining the spacing of wires.

WarmWire is the best there is.

Easy to install in every size or shape room
Safe enough for a Shower Floor and Seat Installation *NEW in 2010*
Eliminate Electro Magnetic Fields with Active Shielding & Twin-wire technology
Durable 3-layer protection with a 25 year warranty
Flexible installation for curves and angles and available in 120VAC and 240VAC
Armored 3-wire power lead - no return wire from the end 1 Connection
Oxygen-free heating elements for long life
High Performance ETFE insulation
Protected by woven stainless steel braid
Strengthened with Polyurethane Jacket for maximum impact & cut resistance
Safe grounded from end to end and UL listed in USA & Canada

Voltage	240 VAC
Voltage Choice	Same Energy efficiency & same Watts/SF. More Sq Footage per circuit with 240v
Watts Per SF	12 Watts per Sq Foot @ 2.5" in. inch spacing
Cable length in feet	330' ft. feet
Cable length in inches	3960" in. inch
Cable length in meters	100 m meter metre
Area Size Covered	70
Heat Output BTUs per SF	41 BTU per Sq Ft/Hour @ 2.5" in. inch spacing
Heating Power : Total BTU’s	2870 BTU total
Manufacturer	Watts Radiant
Power Lead Type	Armored, NEC color code, Single point connection at 1 corner of mat. No return wire like inferior products
Power Lead Length	10 Feet
Power Lead Wire Gauge (varies by heated area)	18 AWG
Heating Wire Spacing	2" - 2.5" - 3" on center
Heated Area	70.0000
Weight	6.4500
Ohms Reading (resistance value)	58-72 ohms
ZERO* EMF (Electro Magnetic Field)	Yes. Verified by Independent Testing Laboratory as ultra low.
Controls/Thermostat is required for operation	SunStat Floor sensing thermostat
Conduit required for Power Leads	Conduit is not required for Power Leads
Packaging	Easy Open Cardboard - no frustration. Easy to dispense wire from box
Width of heating area Feet	Variable - you determine layout width, length, shape