0 Item(s):
$0.00
Checkout
FREE Shipping on orders over $149


1-866-558-3369

Snow & Ice Melting

Snow and Ice Melting systems enhance the safety of your outdoor areas. Heated Driveways and walkways provide a snow free path without shoveling or nasty salts or chemicals.

Permanent systems which are installed within new walkways or driveways provide years of invisible and durable snow melting results, whether it is a new concrete or asphalt heated driveway or a heated walkway of pavers or tile and even heated stairs for safe passage to your front door. These permanent snow melting systems are attached to rebar in new concrete pours, in sand under pavers or in new asphalt layers even on top of existing slabs and then covered by mortar and materials like flagstone, bluestone, etc.

You can even use these snow melting systems to provide comfort on patios to take the chill off cool evenings with up to 170 BTU’s per Sq Ft heat output.

Portable snow melting mats are another solution for foot traffic areas (not driveways) that are already in place. We offer several size solutions in both a lighter duty Residential series for heated sidewalks and steps plus a heavy duty commercial-industrial series of mats that are used by many homeowners as well as hotels, ski resorts, and all types of businesses.

Items 1-10 of 58

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid List

Set Descending Direction
  1. ProMelt PM-224 Snow Sensor

    ProMelt PM-224 Snow Sensor

    $451.00
    The PM-224 sensor uses a heated moisture sensor mounted on its top to detect both precipitation and temperature to activate a Contractor Pro control panel to power ProMelt Mats or Cables. It is meant to be pole-mounted where it is open to the sky and elements. Learn More
  2. 13 Watt Roof & Gutter Plug-in Cable - 5ft

    13 Watt Roof & Gutter Plug-in Cable - 5ft

    List Price: $75.00

    Our Price: $45.00

  3. Loudmouth Monitor Alarm for SunTouch installation

    Loudmouth Monitor Alarm for SunTouch installation

    $21.00
    The SunTouch LoudMouth Monitor sounds an alarm if the SunTouch Heating Wire is cut or damaged, allowing for easy repair BEFORE the mat is covered with Mortar & Tile. We highly recommend the LoudMouth invented and patented by SunTouch. Learn More
  4. ProMelt PM-DP Display Panel

    ProMelt PM-DP Display Panel

    $176.00
    The PM-DP brings control and monitoring of your snow melt system indoors. One glance at the display confirms the system has successfully triggered and is operating. Learn More
  5. HeatTrak Watertight Cable Extender - 20 inches long

    HeatTrak Watertight Cable Extender - 20 inches long

    List Price: $16.45

    Our Price: $16.12

    Place HeatTrak Mats HREXT-20 for heated walkways, at entrances, porches, stair landings, loading docks, handicap ramps, rooftops, and most other surfaces, to provide a clean and safe passageway for foot traffic or wheelchair access. Durable for all foot traffic but you cannot drive on them. Learn More

    Out of stock

  6. ProMelt/SlabHeat Heating Wire Repair Kit

    ProMelt/SlabHeat Heating Wire Repair Kit

    $28.00
    ProMelt Heating Wire Repair Kit, Model: 200400 , MPN: 81012263 for only $28.00. Learn More
  7. HeatTrak Snow Melting Carpet Entrance Mat 40" in. x 60" in. 120V

    HeatTrak Snow Melting Carpet Entrance Mat 40" in. x 60" in. 120V

    List Price: $434.50

    Our Price: $425.81

    HeatTrak Snow Melting Carpet Entrance Mat 40" in. x 60" in. 120V, Model: HCM40-5IB , MPN: by Heat Trak, LLC for only $375.25. Learn More
  8. ProMelt PM-2B/C Snow Sensor 30A 100-277VAC

    ProMelt PM-2B/C Snow Sensor 30A 100-277VAC

    $451.00
    ProMelt PM-2B/C SnowSensor 120/240 30A, Model: 300600 , MPN: 300600 by Watts Radiant for only $451.00. Learn More
  9. 13 Watt Roof & Gutter Plug-in Cable - 100ft

    13 Watt Roof & Gutter Plug-in Cable - 100ft

    List Price: $450.00

    Our Price: $247.80

  10. Marker Plate Snow Melt WYF

    Marker Plate Snow Melt WYF

    $59.00
    The ProMelt Snow Melting aluminum plaque mounts within the snow melting zone to permanently indicate where a snow melting system has been installed for enhanced safety. Building and Electrical codes typically require 1 visible marker per 400 Square Feet or separate area. Installing these permanent marker plates where they will be clearly visible is a good safety practice and help remind workers and future owners that electrical snow melting wires are installed within the surface. Learn More

Items 1-10 of 58

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid List

Set Descending Direction