SunStat View Touchscreen Programmable Thermostat

Our floor was just over three years old. After an extensive investigation, it appears the floor sensor went bad and kept the floor heat turned on for a long time. this in turn caused the load side wire nuts to burn and they burned into the thermostat. I only know something was bad when I seen the thermostat reboot and then shut down. I pulled the thermostat out of the wall and found the burning which would have started a fire if the GFI in the thermostat did not work. So, I suggest to solder the load side wire nut connections (stranded wires from the thermostat to the floor). the source side solid wires were tight so I am assuming the stranded side just got loose with cycling on and off over the years. Warm Your Floor sends you to the manufacturer distributor for replacement. The manufacturer just sent out a new unit no problem. I would also install two floor sensors. Have one rolled up in your thermoset box for a spare. this way you will not have to break up your floor for replacement of a new sensor - it will be there. I was told from the installer that other installers have had the same sensor problem and as luck had it, I was his first.
Also, wish they would indicated what the heating temperature bandwidth is. Our floor is set a 80 degrees during the morning but it likes to stay around 82 to 83 degrees. I checked the floor temperature with a separate thermometer. the Sunstat and the separate thermostat read the same temperature. So, it is not a calibration issue.
Even with all this that took place, I will still recommend the product.

I usually use the non programmable thermostat for my customers, but my customer wanted a programmable one. It was no problem installing and it is working great.

So easy to install and it looks sleek on my wall. Easy to program, I have it turned on in the morning for 3 hours and again for 3 hours in the evening. The rest of the time the floor is maintained at 68 degrees to save energy when we aren't home to use the kitchen. You can program it to be different every day if your schedule is ever changing. Or just simply over ride it to warm your toes as you see fit.

I purchased this thermostat to replace an older one I had that stopped working. The new touchscreen programmable thermostat model is very easy to use and set up with a variety of programming options.

I would definitely recommend this thermostat due to ease of use.

Everything was great. No problems installing and the product is easy to use.

New stat was an easy installation and works perfectly. Like the idea of being able to use the air thermostat for temp control.

The new VIEW Touch Screen Thermostat is intuitive and easy to use. I highly recommend it.

The product worked great to replace my old thermostat. Floors are warm once more.

We ordered this product and replaced an older thermostat that had not worked properly from the first day. This unit installed easily, worked perfectly and was very easy to set up and program. Great product!

This was very easy to install and setup. Nice easy to read and follow screen. I would have like to see a Wi-Fi option for remote control and monitoring

I received and installed the new thermostat to replace our 6 year old model. Works like a charm now!! Thanks so much for the warm floors and the great customer service.