Complete kit-all parts & complete instructions for 1 SunTouch Power Lead Splice repair
Use this kit to repair the Cold Lead Splice connection on a Watts Radiant electric floor warming mat or cable.
The Cold Lead Splice is where the Power Lead connects to the heating elements (black heat shrink covers this factory connection) and may need to be repaired if damaged on the job or if the power lead is cut too short.
This kit is not to be used to extend the power lead and should be used at the direction of manuafacturer technical support.
Only a qualified electrician or technician should make these repairs. Approval must be gained from Watts Radiant before doing this repair. Improper use of these guidelines may result in serious damage to property and persons or failure of the splice. Never repair a mat or cable that has been shortened from its factory length by more than 1 foot of floor warming cable without prior approval from Watts Radiant technical support. If you need additional assistance, please contact Watts Radiant for technical support.
Same repair kit for SunTouch Power Leads for all indoor systems; Mats, UnderFloor and WarmWire.
Kit includes Solder Melt Splice connectors, Heat Shrink tubing and butt crimp connectors - All components needed to reapir a damaged factory connection. You will need a few basic tools to perform a repair - see instructions for details.
The complete splice must be embedded in mortar at least 1.5” from the wall, and at least 2” away from the nearest floor warming cable.
This Kit is for Watts Radiant SunTouch products only.
- Instructions + Video
Instructions + Video
Instruction Manual SunTouch81005277 Power Lead Repair Splice Kit Installation Manual Install Steps
The Included Instructions provide all details and are guidelines only for repairing the “Cold Lead Splice” connection on a Watts Radiant electric floor warming mat or cable.
These guidelines are provided only to assist in the repair of a product. Watts Radiant does not in any way warranty the repair or ensure proper function of the product following the repair.
Only a qualified electrician or technician should make these repairs. Approval must be gained from Watts Radiant before doing this repair. Improper use of these guidelines may result in serious damage to property and persons or failure of the splice.
Skill Level No GFEP / GFCI Protection (Ground Fault Circuit Interrupter) No Maximum Circuit Overload Protection No Maximum Circuit Load No Electrical Box Size (Where Mats connect to Thermostat) No Shower Installation Permitted No Installation Layout Map customized for my project No Expected Floor Temperature No Insulation Recommended No Indoor Installation Only No Installation On Sub Floor No Distance from Wax Ring at toilet flange No Trowel Size recommended No Trowel type Recommended No Cut Warning No Minimum Installation Temperature No
UPC 840213107772 Length of heating area Feet No Width of heating area Inches No Length of heating area Inches No Watts Per SF No Heat Output BTUs per SF No Heating Power : Total BTU's No Minimum Bend Radius No Manufacturer Watts Radiant Full Length End-to-End ground wire No Brand Name SunTouch Floor Warming Power Lead Type No Power Lead Length No Power Lead Wire Gauge (varies by heated area) No Product Thickness No Heating Wire Spacing No Ohms Reading (resistance value) No ZERO* EMF (Electro Magnetic Field) No Controls/Thermostat is required for operation No Conduit required for Power Leads No Packaging Plastic Bag
- More Details
Allows jobsite repair of a power lead damaged on the job by a qualified electrician or technician.
What's In The Box No Individual Items No Warranty from Manufacturer No Heating Wire construction No Heated Area No Wattage : Total watts No Size in Inches No Size in Feet No Amp Draw No Repairable Heating Wire No Installation Style No Custom Size Options No Safety Listing No Canadian Electric Code reference No National Electric Code reference No Acceptable Floor Coverings No Made In USA No