0 Item(s):
FREE Shipping on orders over $149


SunTouch TapeMat 120V 24"x 30' 12003024

Item Number: 12003024

MFR Part No: 81002234

Availability: In stock


Availability : In stock and ready to ship!

FREE Shipping

Enjoy FREE Standard Shipping for all orders over $149!

The 12003024 SunTouch TapeMat 120V 24"x 30' 12003024 installs quickly.

Voltage 120 VAC
How to choose 120 or 240 Volt Same Energy efficiency & same Watts/SF. More Sq Footage per circuit with 240v
Watts Per SF 12 Watts per Sq Foot
Heat Output BTUs per SF 41 BTU per Sq Ft/Hour
Heating Power : Total BTU's 2460 BTU total
Manufacturer SunTouch Watts Radiant
Brand Name SunTouch Tape Mat
Power Lead Type Armored, NEC color code, Single point connection at 1 corner of mat. No return wire like inferior products
Power Lead Length 10 Feet
Power Lead Wire Gauge (varies by heated area) 14 AWG
Product Thickness 0.122 (less than 1/8")
Heating Wire Spacing 2.5" inches
Minimum Bend Radius 1 inch
Weight 6.1500
Ohms Reading (resistance value) 14-17 ohms
ZERO* EMF (Electro Magnetic Field) Yes. Verified by Independent Testing Laboratory as ultra low. REET test
Controls/Thermostat is required for operation SunStat Floor sensing thermostat
Conduit required for Power Leads Conduit does make installation easier in new construction (not required)
Packaging Easy Open Cardboard - no frustration
Width of heating area Feet 2' ft. feet
Length of heating area Feet 30' ft. feet
Width of heating area Inches 24" in. inch
Length of heating area Inches 360" in. inch
Width of heating area Meters 0.61m meter metre
Length of heating area Meters 9.14m meter metre


Recent Reviews

Overall Product Rating:

(5 out of 5)

By: Kyle from OK

Dec 31, 2014

Awesome product - we love the warm tile !

Everything about my transaction with warmyourfloor was excellent. I had looked many products available - from loose wire to other mats - and kept coming back to SunTouch - as I wanted to install over cork for a thermal break from the concrete and they promote that for this product. Warmyourfloor was very helpful with the layout drawing, and in my odd shaped bathroom this project would have been very stressful without it. From my drawing, they calculated the sq footage I needed and how to layout it out. The mat itself laid out easliy and stuck well to the cork underlayment (over concrete slab). I used a little extra double sided tape on the mat and a lot of hot glue on the loose wire portions. My tile guy decided to totally cover the mat in thin set, since that is how he leveled the room - so it was a 2 day process allowing the skim coat to dry. Even with the additional thickness over the mat, it heats well and feels great. The thermostat is great and much better than the one I used previously in my kitchen loose wire installation.
The wire and the connections all seem very solid and well made - nothing seemed cheap - which is good as it is buried under a lot of thinset and tile! I did put in one backup thermostat sensor wire - cheap insurance!