The WWKIT120090WD WarmWire kit 90 Sq Ft 120V Radiant Floor Heating Cable covers large areas.
- Cable length: 423' ft. feet, or (5076" in. inch)
- Heated area: 90 Sq Ft
- Heat output (BTU): 3690 BTU total
- Click here to see all the quality standard features built in to SunTouch WarmWire .
- Whats’s in the box: WWKIT120090WD - WarmWire Spool, Coil(s) strap, NEW SunStat PRO II Programmable Thermostat, Sensor Wire, LoudMouth, Tape, Digital Meter Reader, Detailed Installation Manual.
- 25 Year Warranty
- Made in the USA
- WWKIT120090WD, 120090KIT
WarmWire = Zero EMFAn emerging issue in the electric radiant heat industry is EMF (electromagnetic field) radiation. SunTouch pioneered and sells only ZERO EMF products constructed with active dual wire EMF-canceling technology. All SunTouch products use a complex wire construction with two heating elements in parallel with an added and patented helical twist to eliminate EMF. Other electric radiant floor heating companies sell single-wire systems that release high levels of EMF when compared to SunTouch. What is EMF? Electromagnetic fields (EMF) come from all electrical appliances, but studies show an average American's daily exposure is less than 1 unit (mG) of EMF. But. when you sit on an unshielded electric radiant floor, you may be exposed to 20, 40, or more times the average daily exposure. This Data comes from Independent testing. Read More Here Is limiting exposure to EMF important? No one is certain. The World Health Organization says the data is inconclusive to date, but continues their research. We provide this EMF information because it is important to some people, not to frighten you or exaggerate any risk. For many years customers have chosen SunTouch Zero EMF systems, but we leave the choice to you after explaining what we do know. |
| Voltage | 120 VAC |
|---|---|
| Voltage Choice | Same Energy efficiency & same Watts/SF. More Sq Footage per circuit with 240v |
| Watts Per SF | 12 Watts per Sq Foot @ 2.5" in. inch spacing |
| Cable length in feet | 423' ft. feet |
| Cable length in inches | 5076" in. inch |
| Cable length in meters | 128.18 m meter metre |
| Area Size Covered | 90 |
| Heat Output BTUs per SF | 41 BTU per Sq Ft/Hour @ 2.5" in. inch spacing |
| Heating Power : Total BTU’s | 3690 BTU total |
| Manufacturer | Watts Radiant |
| Power Lead Type | Armored, NEC color code, Single point connection at 1 corner of mat. No return wire like inferior products |
| Power Lead Length | 10 Feet |
| Power Lead Wire Gauge (varies by heated area) | 14 AWG |
| Heating Wire Spacing | 2" - 2.5" - 3" on center |
| Heated Area | 90.0000 |
| Weight | 17.6000 |
| Ohms Reading (resistance value) | 11-15 ohms |
| ZERO* EMF (Electro Magnetic Field) | Yes. Verified by Independent Testing Laboratory as ultra low. |
| Controls/Thermostat is required for operation | SunStat Floor sensing thermostat |
| Conduit required for Power Leads | Conduit is not required for Power Leads |
| Packaging | Easy Open Cardboard - no frustration. Easy to dispense wire from box |
| Width of heating area Feet | Variable - you determine layout width, length, shape |
YOU MIGHT ALSO LIKE...
-
RPM-330 Radiant Positioning Mat 5/16" x 20" x 44" (6.11 Sq Ft)
List Price: $18.89
Our Price: $14.50
-
SunTouch SunStat PRO II *New* Programmable Thermostat LCD
$175.00 -
Strap WarmWire & Cable 25 Ft
$16.00 -
Tape 2-Sided Small Roll 3/4" inch wide x 18' Ft long for installing 20 SF of mat
List Price: $6.00
Our Price: $5.85
-
Cork Insulation for concrete Slab sold by roll of 60 SF
List Price: $129.00
Our Price: $109.00
-
Digital Multi Meter Measures Floor Heating System Resistance (Ohms)
List Price: $19.99
Our Price: $13.99
-
Loudmouth Monitor Alarm for SunTouch installation
$21.00 -
Cable Trowel 3/8 in. x ½ in. Heavy Duty Plastic for thin setting tile directly over floor heating
$15.00
Recent Reviews
Overall Product Rating:
| (5 out of 5) |
By: Bruce C.
Location: Denver, CO
Dec 27, 2012
Cable easy to lay down
I have been very happy with the product. The cable was easy to lay down, and we had some creative spaces to cover. I ended up having to take 3 different sessions to get all the tile laid down, and it was great to be able to connect the cable and have the floor nice and warm to work on. It also helped the thin set to dry much faster. The only difficult I had was with the meter trying to get an ohm reading. It seemed to vary a lot so I had to be sure I had really good lead connections to get a consistent reading. I was glad to have the loud mouth, as dropped a tool a couple of times and was glad to immediately know I hadn’t caused any problem.
