0 Item(s):
FREE Shipping on orders over $149


WarmWire kit 110 Sq Ft 120V Radiant Floor Heating Cable

Item Number: 120110WD-KIT

Alternate Part Number: DISCONTINUED


Availability: Out of stock


Availability: Out of stock


More Views

The 120110WD-KIT WarmWire kit 110 Sq Ft 120V Radiant Floor Heating Cable covers large areas.

  • Cable length: 517' ft. feet, or (6204" in. inch)
  • Heated area: 110 Sq Ft
  • Heat output (BTU): 4510 BTU total
  • Click here to see all the quality standard features built in to SunTouch WarmWire .
  • Whats’s in the box: 120110WD-KIT - WarmWire Spool, Coil(s) strap, SunStat PRO II Programmable Thermostat, Sensor Wire, LoudMouth, Tape, Digital Digital Multimeter, Detailed Installation Manual.
  • 25 Year Warranty
  • Made in the USA
Voltage 120 VAC
How to choose 120 or 240 Volt Same Energy efficiency & same Watts/SF. More Sq Footage per circuit with 240v
Watts Per SF 12 Watts per Sq Foot @ 2.5" in. inch spacing
Heat Output BTUs per SF 41 BTU per Sq Ft/Hour @ 2.5" in. inch spacing
Heating Power : Total BTU's 4510 BTU total
Manufacturer Watts Radiant
Brand Name SunTouch Warm Wire
Power Lead Type Armored, NEC color code, Single point connection at 1 corner of mat. No return wire like inferior products
Power Lead Length 10 Feet
Power Lead Wire Gauge (varies by heated area) 14 AWG
Packaging Easy Open Cardboard - no frustration. Easy to dispense wire from box
Product Thickness 1/8" - 3/16" (nominal) Shorter cables are thinner.
Heating Wire Spacing 2" - 2.5" - 3" on center
Minimum Bend Radius 1/2" 0.50 inch
Weight 20.2500
Ohms Reading (resistance value) 17-22 ohms
ZERO* EMF (Electro Magnetic Field) Yes. Verified by Independent Testing Laboratory as ultra low.
Controls/Thermostat is required for operation SunStat Floor sensing thermostat
Conduit required for Power Leads Conduit is not required for Power Leads
Width of heating area Feet Variable - you determine layout width, length, shape

Recent Reviews

Overall Product Rating:

(4 out of 5)

By: Michigan CG

Feb 22, 2013

Great, mostly

Our master bath suite is 230 square feet and I thought I bought a big enough system for the toilet room, shower area, tub area and the large walk-in closet. Turns out I could not heat the walk-in closet because I should have ordered a larger floor area. The coverage area I thought was not enough.

That being said we absolutely love the system, it was easy to install and my wife loves it. Turns out that she is fine with the walk-in closet not being heated floors. We have a family room that is 300 SF that we are going to put tile in and will be buying the system again for that room. We are very satisfied with the exception of the advertised coverage area. You folks might want to adjust the actual floor area that can be covered.