Custom TapeMat

SKU: CustomTapeMat
Need help selecting voltage or coverage area? Take a look at our Quick Guide

One of the quickest installation options!

Based on the plan you provide, SunTouch makes a custom in-floor heating mat to match the curves, angles, and cut-outs of your floor.

  Installation is easy. Order a mat to fit your exact floor plan; no cuts or turns will be required.
  Simply unroll the Custom TapeMat, then apply thin-set or self-leveler to fit the mat to your floor space.

Send us a sketch of your layout and we will get you a quote in 24 hours or less!

Instructions + Video

Video

Indoor / Outdoor

INTERIOR floor heating application only. Embedded in mortar or self leveling concrete only.

Install Steps

Installation Steps:

  1. Suntouch TapeMat Installation - Step 1

    Step #1

    Suntouch TapeMat Installation - Step 2

    Step #2

    Suntouch TapeMat Installation - Step 3

    Step #3

    Plan Your Layout
    Measure and draw a layout simple plan (or send it to us and let us draw a layout for you) mark your Thermostat location (starting point for mats) and what areas you want to warm. Expect to place mats everywhere you want warmth heat does not spread.

    Roll Out Mat(s)
    Turn and cut mesh (if needed) to custom fit to your room. Attach mat to subfloor with the built-in tape then mount the SunStat and place floor temperature sensor between 2 heating wires.
    Cover with Mortar
    Cover mats with a cement based mortar, let it cure, then install your floor covering. If you are installing tile, you can install the tile when you apply the mortar. Connect mat power leads to your thermostat in parallel.

Minimum Installation Temperature

50 Degrees F / 10 Degrees C

Maximum Circuit Load

15 Amps

Maximum Circuit Overload Protection

20 A Breaker

Shower Installation

Yes, can be installed in a tiled shower. UL listed, verify local code.

Trowel Size recommended

Minimum 3/8" x 1/4". Dependent on tile size - verify with tile/mortar manufacturer.

Distance from Toilet

Install 4-6" away from the toilet drain wax ring. It can be under the front of toilet - Approximately 20" from wall.

Specifications

UPC 98268027419
EMF (Electro Magnetic Field) Yes. Verified by Independent Testing Laboratory as ultra low. REET test.
Power Lead Wire Gauge 14 AWG
Power Lead Length 10'
Power Lead Type Armored, NEC color code, Single point connection at 1 corner of mat.
Thickness 0.122 (less than 1/8")
Voltage 120 VAC
Wattage per SF 12
Spacing of Heating Wire 3"
Manufacturer Watts Radiant
Heated Area in Sq Ft typical 10

More Details

Brand Name SunTouch
Safety Listing UL (Underwriters Laboratory) Listed for U.S. and Canada under UL 1673 and CAN/CSA C22.2 No. 130-03, File No. E185866
Warranty from Manufacturer 25 year warranty backed by USA Manufacturer since 1873
What's In The Box TapeMat, Detailed Installation Manual. Installation videos online.
Amp Draw 1
Wire Construction ETFE Fluoropolymer, metal shield and Outside layer of PEX
Total Watts 120
Acceptable Floor Coverings Natural Stone,Tile, Laminate, Engineered Woods, Carpet, Vinyl, Linoleum, Solid Hardwood (if you use sleepers)

Reviews

Customer Reviews

Overall
Perfect fit easy to install
Review by
Having a custom mat made was the best way to install this heated floor. After trying several contractors, I found that most didn't know anymore installing this floor than I did (and all I did was read the instructions)! Decided it was straightforward and did it myself, the pre-made mat made it really simple and the ffit was excellent.
per page
Write Your Own Review
You're reviewing: Custom TapeMat 140 SqFt 240V
Loading...

You submitted your review for moderation.