Based on the plan you provide, SunTouch makes a custom in-floor heating mat to match the curves, angles, and cut-outs of your floor.
• Installation is easy. Order a mat to fit your exact floor plan; no cuts or turns will be required.
• Simply unroll the Custom TapeMat, then apply thin-set or self-leveler to fit the mat to your floor space.
Send us a sketch of your layout and we will get you a quote in 24 hours or less!
INTERIOR floor heating Application only. Embedded in Mortar or self leveling concrete only.
Plan Your Layout
|Roll Out Mat(s)
Turn and cut mesh (if needed) to custom fit to your room. Attach mat to subfloor with the built-in tape then mount the SunStat and place floor temperature sensor between 2 heating wires.
|Cover with Mortar
Cover mats with a cement based mortar, let it cure, then install your floor covering. If you are installing tile, you can install the tile when you apply the mortar. Connect mat power leads to your thermostat in parallel.
50 Degrees F / 10 Degrees C
20 A Breaker
Yes, can be installed in a tiled shower. UL listed, verify local code.
Minimum 3/8" x 1/4". Dependent on tile size - verify with tile/mortar manufacturer.
Install 4 - 6 inches away; can be under front of toilet. Approx 20" from wall.
|EMF (Electro Magnetic Field)||Yes. Verified by Independent Testing Laboratory as ultra low. REET test.|
|Power Lead Wire Gauge||14 AWG|
|Power Lead Length||10'|
|Power Lead Type||Armored, NEC color code, Single point connection at 1 corner of mat.|
|Thickness||0.122 (less than 1/8")|
|Wattage per SF||12|
|Spacing of Heating Wire||3"|
|Heated Area Size Covered||60|
|Safety Listing||UL (Underwriters Laboratory) Listed for U.S. and Canada under UL 1673 and CAN/CSA C22.2 No. 130-03, File No. E185866|
|What's In The Box||TapeMat, Detailed Installation Manual. Installation videos online.|
|Wire Construction||ETFE Fluoropolymer, metal shield and Outside layer of PEX|
SunTouch = Zero EMF
An emerging issue in the electric radiant heat industry is EMF (electromagnetic field) radiation. SunTouch pioneered and sells only ZERO EMF products constructed with active dual wire EMF-canceling technology.
All SunTouch products use a complex wire construction with two heating elements in parallel with an added and patented helical twist to eliminate EMF. Other electric radiant floor heating companies sell single-wire systems that release high levels of EMF when compared to SunTouch.
What is EMF? Electromagnetic fields (EMF) come from all electrical appliances, but studies show an average American's daily exposure is less than 1 unit (mG) of EMF. But. when you sit on an unshielded electric radiant floor, you may be exposed to 20, 40, or more times the average daily exposure. This Data comes from Independent testing. Read More Here
Is limiting exposure to EMF important? No one is certain. The World Health Organization says the data is inconclusive to date, but continues their research. We provide this EMF information because it is important to some people, not to frighten you or exaggerate any risk.
For many years customers have chosen SunTouch Zero EMF systems, but we leave the choice to you after explaining what we do know.
|Acceptable Floor Coverings||Natural Stone,Tile, Laminate, Engineered Woods, Carpet, Vinyl, Linoleum, Solid Hardwood (if you use sleepers)|