FREE SHIPPING on orders over $149* (exclusions apply) See Details

Custom TapeMat 80 SqFt 240V

SKU# C12240080ST

More Views

$1,241.00
(1)

FREE Shipping

This item is eligible for FREE standard shipping!

Details

One of the quickest installation options!

Based on the plan you provide, SunTouch makes a custom in-floor heating mat to match the curves, angles, and cut-outs of your floor.

  Installation is easy. Order a mat to fit your exact floor plan; no cuts or turns will be required.
  Simply unroll the Custom TapeMat, then apply thin-set or self-leveler to fit the mat to your floor space.

Send us a sketch of your layout and we will get you a quote in 24 hours or less!

Instructions + Video

Instructions + Video

Instruction Manual
Install Steps

Installation Steps:

  1. Suntouch TapeMat Installation - Step 1

    Step #1

    Suntouch TapeMat Installation - Step 2

    Step #2

    Suntouch TapeMat Installation - Step 3

    Step #3

    Plan Your Layout
    Measure and draw a layout simple plan (or send it to us and let us draw a layout for you) mark your Thermostat location (starting point for mats) and what areas you want to warm. Expect to place mats everywhere you want warmth heat does not spread

    Roll Out Mat(s)
    Turn and cut mesh (if needed) to custom fit to your room. Attach mat to subfloor with the built-in tape then mount the SunStat and place floor temperature sensor between 2 heating wires.
    Cover with Mortar
    Cover mats with a cement based mortar, let it cure, then install your floor covering. If you are installing tile, you can install the tile when you apply the mortar. Connect mat power leads to your thermostat in parallel.
VIDEO
Maximum Circuit Load 15 Amps
Maximum Circuit Overload Protection 20 A Breaker
Shower Installation Yes, can be installed in a tiled shower. UL listed, verify local code.
Indoor/Outdoor? INTERIOR floor heating Application only. Embedded in Mortar or self leveling concrete only.
Distance from Toilet Install 4 - 6 inches away; can be under front of toilet. Approx 20" from wall.
Trowel Size recommended Minimum 3/8" x 1/4". Dependent on tile size - verify with tile/mortar manufacturer.
Minimum Install Temperature 50 Degrees F / 10 Degrees C
Specifications

Specifications

UPC 98268027693
Voltage 240 VAC
Wattage per SF 12
Manufacturer Watts Radiant
Power Lead Type Armored, NEC color code, Single point connection at 1 corner of mat.
Power Lead Length 10'
Power Lead Wire Gauge 14 AWG
Thickness 0.122 (less than 1/8")
Spacing of Heating Wire 3"
Minimum Bend Radius 1"
EMF (Electro Magnetic Field) Yes. Verified by Independent Testing Laboratory as ultra low. REET test.
More Details

More Details

What's In The Box TapeMat, Detailed Installation Manual. Installation videos online.
Warranty 25 year warranty backed by USA Manufacturer since 1873
Why Helps

SunTouch = Zero EMF

An emerging issue in the electric radiant heat industry is EMF (electromagnetic field) radiation. SunTouch pioneered and sells only ZERO EMF products constructed with active dual wire EMF-canceling technology.

All SunTouch products use a complex wire construction with two heating elements in parallel with an added and patented helical twist to eliminate EMF. Other electric radiant floor heating companies sell single-wire systems that release high levels of EMF when compared to SunTouch.

What is EMF? Electromagnetic fields (EMF) come from all electrical appliances, but studies show an average American's daily exposure is less than 1 unit (mG) of EMF. But. when you sit on an unshielded electric radiant floor, you may be exposed to 20, 40, or more times the average daily exposure. This Data comes from Independent testing. Read More Here

Is limiting exposure to EMF important? No one is certain. The World Health Organization says the data is inconclusive to date, but continues their research. We provide this EMF information because it is important to some people, not to frighten you or exaggerate any risk.

For many years customers have chosen SunTouch Zero EMF systems, but we leave the choice to you after explaining what we do know.

Heated Area Size Covered 80
Amp Draw 4
Wire Construction ETFE Fluoropolymer, metal shield and Outside layer of PEX
Total Watts 960
Safety Listing UL (Underwriters Laboratory) Listed for U.S. and Canada under UL 1673 and CAN/CSA C22.2 No. 130-03, File No. E185866
Acceptable Floor Coverings Natural Stone,Tile, Laminate, Engineered Woods, Carpet, Vinyl, Linoleum, Solid Hardwood (if you use sleepers)

You might also like...

  1. KERDI-SHOWER-KIT 32" x 60" Centered Stainless Steel Drain with PVC Flange

    KERDI-SHOWER-KIT 32" x 60" Centered Stainless Steel Drain with PVC Flange

    Leave the First Review

    Retail: $569.94

    You Save: $56.99

    $512.95

    Learn More
  2. SunStat Command Programmable Thermostat

    SunStat Command Programmable Thermostat

    Retail: $210.00

    You Save: $21.00

    $189.00

    Learn More

Reviews

Write Your Own Review

  • Perfect fit easy to install

    Having a custom mat made was the best way to install this heated floor. After trying several contractors, I found that most didn't know anymore installing this floor than I did (and all I did was read the instructions)! Decided it was straightforward and did it myself, the pre-made mat made it really simple and the ffit was excellent.

    Posted on June 5, 2017 by Mompantero

View All Reviews

Have a question?

Check out our Knowledge Center

or give us a call!

1-866-558-3369

Mon - Fri 6:00am to 5:00pm PST