The larger of the two Schluter Systems kits, this DITRA-HEAT Kit contains everything you need to install your DITRA-HEAT floor heating system:
• 1 DITRA-HEAT Cable - 37.5 sq ft
• 7 DITRA-HEAT Uncoupling Membrane sheets - 60.3 sq ft
(needed to install the cable)
• 1 DHERT102/BW Programmable Thermostat
• 2 Sensor Wires
This is an all-inclusive package for one-stop shopping!
If you are looking for a kit in a different size or voltage, please don't hesitate to call.
All substrates must be clean, even, and load bearing. Bond inhibiting surfaces must be removed prior to the application of DITRA-HEAT. For complete installation guidelines and warranty criteria, please refer to the downloadable Instruction Manual (↖ linked above) or to the installation video online.
Note: Type, thickness, and format of the tile or stone surface covering must be at least 2" x 2" (5 cm x 5 cm).
|Cable Length||124.1 ft|
|Cable Length (meters)||37.8 m|
|Heated Area Size Covered||60.3 sq.ft.|
|Wattage per SF||12.75|
|Heating Power Output per Hour (BTU)||1620.77|
|Spacing of Heating Wire||3-stud and 3-2-3-2-stud spacing. (Tension loop can be made around a single stud if necessary. See installation handbook for details.)|
|What's In The Box||7 Sheets Ditra-Heat Membrane, 1 Cable (DHEHK12038), 2 sensors, 1 Touch-Screen Thermostat (DHERT102/BW)|
|Warranty from Manufacturer||10-25 yrs|
|Spacing between runs 1||3 stud spacing|
|Spacing between runs 2||3-2-3-2 stud spacing|
|Heated SF 1||37.5|
|Heated SF 2||31.3|
|Watts Per SF 1||12.7|
|Watts Per SF 2||15.2|