0 Item(s):
$0.00
Checkout
FREE Shipping on orders over $149


1-866-558-3369

Snow & Ice Melting

Snow and Ice Melting systems enhance the safety of your outdoor areas. Heated Driveways and walkways provide a snow free path without shoveling or nasty salts or chemicals.

Permanent systems which are installed within new walkways or driveways provide years of invisible and durable snow melting results, whether it is a new concrete or asphalt heated driveway or a heated walkway of pavers or tile and even heated stairs for safe passage to your front door. These permanent snow melting systems are attached to rebar in new concrete pours, in sand under pavers or in new asphalt layers even on top of existing slabs and then covered by mortar and materials like flagstone, bluestone, etc.

You can even use these snow melting systems to provide comfort on patios to take the chill off cool evenings with up to 170 BTU’s per Sq Ft heat output.

Portable snow melting mats are another solution for foot traffic areas (not driveways) that are already in place. We offer several size solutions in both a lighter duty Residential series for heated sidewalks and steps plus a heavy duty commercial-industrial series of mats that are used by many homeowners as well as hotels, ski resorts, and all types of businesses.

20 Item(s)

per page

Grid List

Set Descending Direction
  1. GPT-3 Adj Thermostat 120-277V

    GPT-3 Adj Thermostat 120-277V

    List Price: $1,250.00

    Our Price: $1,008.00

    The GPT-3 Freeze Protection Thermostat is designed as an alternative to electromechanical thermostats and high cost single and multi-channel temperature controls. It has a set point temperature range between 41F and 77F (5C and 25C) which is an ideal range for freeze protection applications. Learn More
  2. ProMelt CP-200 Snow Melt Control Panel

    ProMelt CP-200 Snow Melt Control Panel

    $843.00
    ProMelt Contactor Pro panels provide industry leading automatic snow melting and deicing control. For best results, it should be used in conjunction with a sensor, such as the PM-224, to regulate ProMelt Mats and Cables. Learn More
  3. Marker Plate Snow Melt WYF

    Marker Plate Snow Melt WYF

    $59.00
    The ProMelt Snow Melting aluminum plaque mounts within the snow melting zone to permanently indicate where a snow melting system has been installed for enhanced safety. Building and Electrical codes typically require 1 visible marker per 400 Square Feet or separate area. Installing these permanent marker plates where they will be clearly visible is a good safety practice and help remind workers and future owners that electrical snow melting wires are installed within the surface. Learn More
  4. SunTouch DualTemp Air/Floor Thermostat, 24V (Patio Heating Only)

    SunTouch DualTemp Air/Floor Thermostat, 24V (Patio Heating Only)

    $73.00
    The SunTouch ProMelt Digital DualTemp P-3285 thermostat is a heat-only thermostat with the ability to monitor surface temperature (using floor sensor 500802 sold separately) and works in conjunction with a CP Panel for outdoor patio heating. Learn More
  5. ProMelt CP-50 Snow Melt Control Panel

    ProMelt CP-50 Snow Melt Control Panel

    $476.00
    ProMelt Contactor Pro panels provide industry leading automatic snow melting and deicing control. For best results, it should be used in conjunction with a sensor, such as the PM-224, to regulate ProMelt Mats and Cables. Learn More
  6. Loudmouth Monitor Alarm for SunTouch installation

    Loudmouth Monitor Alarm for SunTouch installation

    $21.00
    The SunTouch LoudMouth Monitor sounds an alarm if the SunTouch Heating Wire is cut or damaged, allowing for easy repair BEFORE the mat is covered with Mortar & Tile. We highly recommend the LoudMouth invented and patented by SunTouch. Learn More
  7. ProMelt PM-224 Snow Sensor

    ProMelt PM-224 Snow Sensor

    $451.00
    The PM-224 sensor uses a heated moisture sensor mounted on its top to detect both precipitation and temperature to activate a Contractor Pro control panel to power ProMelt Mats or Cables. It is meant to be pole-mounted where it is open to the sky and elements. Learn More
  8. STAT-LS-ADJ Adjustable Stat

    STAT-LS-ADJ Adjustable Stat

    List Price: $675.00

    Our Price: $525.00

    The STAT-LS-ADJ thermostat can be used as a single circuit control or as a pilot control for several circuits through a contactor panel for Nuheat Snow and Ice Melting systems. It has an adjustable temperature set point at which the thermostat will switch the heating cable(s) on/off. Learn More
  9. ProMelt PM-DP Display Panel

    ProMelt PM-DP Display Panel

    $176.00
    The PM-DP brings control and monitoring of your snow melt system indoors. One glance at the display confirms the system has successfully triggered and is operating. Learn More
  10. SST-2 Freeze Protect Thermostat 120-277V

    SST-2 Freeze Protect Thermostat 120-277V

    List Price: $450.00

    Our Price: $338.00

    The SST-2 Freeze Protection Thermostat is designed to replace electromechanical thermostats for Nuheat Snow and Ice Melting systems for more cost-sensitive applications without sacrificing GFCI protection. The SST-2 activates heating cables at temperatures below 40F (4.4C) and turns them off at temperature above 42F (5.5C). Learn More
  11. ProMelt PM-2B/C Snow Sensor 30A 100-277VAC

    ProMelt PM-2B/C Snow Sensor 30A 100-277VAC

    $451.00
    ProMelt PM-2B/C SnowSensor 120/240 30A, Model: 300600 , MPN: 300600 by Watts Radiant for only $451.00. Learn More
  12. ProMelt/SlabHeat Heating Wire Repair Kit

    ProMelt/SlabHeat Heating Wire Repair Kit

    $28.00
    ProMelt Heating Wire Repair Kit, Model: 200400 , MPN: 81012263 for only $28.00. Learn More
  13. RCU-4 Remote Control Unit

    RCU-4 Remote Control Unit

    List Price: $295.00

    Our Price: $233.00

    The RCU-4 is a remote control for Snow and Ice Melting Systems that can be used in conjunction with a GF Pro, APS-4C or SC-40C panel. It runs flush with the wall and has a light-up display that indicates when the system is running. Learn More
  14. ProMelt CP-100 Snow Melt Control Panel

    ProMelt CP-100 Snow Melt Control Panel

    $597.00
    ProMelt Contactor Pro panels provide industry leading automatic snow melting and deicing control. For best results, it should be used in conjunction with a sensor, such as the PM-224, to regulate ProMelt Mats and Cables. Learn More
  15. Strap WarmWire & Cable 25 Ft

    Strap WarmWire & Cable 25 Ft

    $16.00
    WarmWire Cable Strap is used to hold WarmWire Cables in place on the sub floor surface at the spacing you choose. All 3 spacing options 2, 2.5 and 3 inch can be maintained using this thin metal strapping. Learn More
  16. ProMelt PM-824 Snow Sensor

    ProMelt PM-824 Snow Sensor

    $527.00
    The PM-824 uses a remote (wired) moisture sensor to detect both precipitation and temperature to activate a Contractor Pro control panel to power ProMelt Mats or Cables. It is identical to the PM-224 except for the fact that its sensor is remote instead of being attached to the top of the unit. Learn More
  17. Sensor Wire 10K For DualTemp Thermostat

    Sensor Wire 10K For DualTemp Thermostat

    $14.00
    Sensor Wire 10K For DualTemp Thermostat, Model: 500802 , MPN: 500802 by Watts Radiant for only $14.00. Learn More

    Out of stock

  18. ProMelt PM-HSC5 Surface Sensor Detector 24v

    ProMelt PM-HSC5 Surface Sensor Detector 24v

    $1,909.00
    The PM-HSC5 is a surface mounted snow detector. It is used to detect snowfall and low temperature and then automatically activate the ProMelt Mats or Cables via a CP panel. It has built-in temperature and moisture detection and a drying cycle (not adjustable) after snow melting is complete. It is comprised of a sensor and sensor socket that is embedded in the slab level with the surface where ProMelt is installed. Learn More
  19. STAT-LS-40F Fixed Point Stat

    STAT-LS-40F Fixed Point Stat

    List Price: $300.00

    Our Price: $225.00

    The Nuheat STAT-LS-40F thermostat automatically switches power to the cable(s) on/off at 40�F. Learn More
  20. ProMelt PM-5 SnowSensor 120/208/240v 2x30A

    ProMelt PM-5 SnowSensor 120/208/240v 2x30A

    $506.00
    The PM-5 sensor-controller uses a heated moisture sensor mounted on its top to detect both precipitation and tempterature to activate the ProMelt Mats or Cables when conditions are right for snowfall. It is meant to be pole-mounted where it is open to the sky and elements. Learn More

20 Item(s)

per page

Grid List

Set Descending Direction