0 Item(s)
$0.00
View Cart


FREE Shipping on orders over $149
1-866-558-3369

Snow & Ice Melting

Never shovel snow again! Snow and Ice Melting systems enhance the safety of your outdoor areas. Heated Driveways and walkways provide a snow free path without shoveling or nasty salts or chemicals.

Permanent systems, like ProMelt mats and cables, can be installed within new walkways or driveways provide years of invisible and durable snow melting results, whether it is a new concrete or asphalt heated driveway or a heated walkway of pavers or tile and even heated stairs for safe passage to your front door. These permanent snow melting systems are attached to rebar in new concrete pours, in sand under pavers or in new asphalt layers even on top of existing slabs and then covered by mortar and materials like flagstone, bluestone, etc.

You can even use these snow melting systems to provide comfort on patios to take the chill off cool evenings with up to 170 BTU’s per Sq Ft heat output.

HeatTrak’s portable snow melting mats are another solution for foot traffic areas (not driveways) that are already in place. We offer several size solutions in both a lighter duty Residential series for heated sidewalks and steps plus a heavy duty commercial-industrial series of mats that are used by many homeowners as well as hotels, ski resorts, and all types of businesses.

Ready for Heated Floors?

Installation is easy and we're here to help!

Floor heating basics Planning your layout videos

SKU
Set Descending Direction
5

Items 1-10 of 27

  1. ProMelt Control Kit PM-L3, Slab-mounted Surface Sensor

    ProMelt Control Kit PM-L3, Slab-mounted Surface Sensor

    Our Price
    Our Price: $1,933.00
    The PM-L3 kit provides the best combination of efficiency and automated operation. This kit includes a PM-653 touchscreen control, a PM-070 surface-mounted snow and ice sensor with a PM-091 socket and outdoor temperature sensor. This control combination optimizes the energy efficiency of a snow melting by running it at the lowest possible temperature to effectively melt snow and ice, leading to a reduction in power usage and monthly energy costs. A ContactorPro panel is required to provide power for the mats, cables & control. Learn More
  2. APS-3C 208-240V Control Panel

    APS-3C 208-240V Control Panel

    Our Price

    List Price: $1,300.00

    Our Price: $1,171.00

    The APS-3C 208-240V Control Panel automatically controls when used in conjunction with one or more sensors such as the SIT-6E or the GIT-1. This ensures maximum efficiency and minimum cost when using a 208 or 240 volt Nuheat snow and ice melting system. The APS-3C 208-240V can handle an amp load of up to 24. Learn More
  3. SC-40C Satellite Contactor 600v 3ph 50A

    SC-40C Satellite Contactor 600v 3ph 50A

    Our Price

    List Price: $1,400.00

    Our Price: $1,189.00

    The SC-40C 600V Contactor allows for modular control of a snow and ice melting system. As many SC-40C Contactors can be connected to and run by a single APS-4C Control Panel. Learn More
  4. ProMelt PM-HSC5 Surface Sensor Detector 24v

    ProMelt PM-HSC5 Surface Sensor Detector 24v

    Our Price
    Our Price: $1,909.00
    The PM-HSC5 is a surface mounted snow detector. It is used to detect snowfall and low temperature and then automatically activate the ProMelt Mats or Cables via a CP panel. It has built-in temperature and moisture detection and a drying cycle (not adjustable) after snow melting is complete. It is comprised of a sensor and sensor socket that is embedded in the slab level with the surface where ProMelt is installed. Learn More
  5. Weather-Ready R13P8-2 (watts=8-13) 240V - 250' spool

    Weather-Ready R13P8-2 (watts=8-13) 240V - 250' spool

    Our Price

    List Price: $2,250.00

    Our Price: $1,350.00

    Nuheat Weather-Ready roof and gutter deicing cables can be easily installed onto a roof or inside gutters and downspouts to create and maintain paths for melted snow and ice to drain. This can help prevent the major damage and expensive repairs caused by icicles and snow dams. Learn More
  6. SC-40C Satellite Contactor 208-240v 3ph 50A

    SC-40C Satellite Contactor 208-240v 3ph 50A

    Our Price

    List Price: $1,350.00

    Our Price: $1,135.00

    The SC-40C 208/240V Contactor allows for modular control of a snow and ice melting system. As many SC-40C Contactors can be connected to and run by a single APS-4C Control Panel. Learn More
  7. Weather-Ready R8P5-2 (watts=5-8) 240V - 250' spool

    Weather-Ready R8P5-2 (watts=5-8) 240V - 250' spool

    Our Price

    List Price: $1,937.50

    Our Price: $1,162.50

    Nuheat Weather-Ready roof and gutter deicing cables can be easily installed onto a roof or inside gutters and downspouts to create and maintain paths for melted snow and ice to drain. This can help prevent the major damage and expensive repairs caused by icicles and snow dams. Learn More
  8. APS-4C 600V Control Panel

    APS-4C 600V Control Panel

    Our Price

    List Price: $1,525.00

    Our Price: $1,348.00

    The APS-4C 600V Control Panel automatically controls when used in conjunction with one or more sensors, such as the SIT-6E or the GIT-1. This ensures maximum efficiency and minimum cost when using a 600 volt Nuheat snow and ice melting system. The APS-4C 600V can handle an amp load of up to 50. Learn More
  9. Surface Slab-mounted Snow Sensor PM-090

    Surface Slab-mounted Snow Sensor PM-090

    Our Price
    Our Price: $1,169.00
    The PM-090 Snow/Ice Sensor is an in-ground sensor that automatically detects snow or ice on a driveway or walkway. This sensor allows the PM-653 Snow Melting Control to automatically operate the snow/ice melt system only when snow or ice is present, while also providing slab temperature feedback to the control. Must be installed with PM-091 Sensor Socket. Learn More
  10. APS-4C 208-240V Control Panel

    APS-4C 208-240V Control Panel

    Our Price

    List Price: $1,500.00

    Our Price: $1,325.00

    The APS-4C 208-240V Control Panel automatically controls when used in conjunction with one or more sensors, such as the SIT-6E or the GIT-1. This ensures maximum efficiency and minimum cost when using a 208 or 240 volt Nuheat snow and ice melting system. The APS-4C 208-240V can handle an amp load of up to 50. Learn More

SKU
Set Descending Direction
5

Items 1-10 of 27