ProMelt 60 Sq Ft 208V Snow Melting Cable

Item Number: SC50208060

Alternate Part Number: SC50208060

MFR Part No: 81011386

Availability: In stock

$494.00

Be the first to review this product

Qty:

FREE Shipping

Enjoy FREE Standard Shipping for all orders over $149!

More Views

ProMelt electric radiant snow melting cables are the most versatile and lowest cost option for snow melting installation any size, any shape - quickly providing electrically heated walkways and driveways. Cables are ideal for steps, curved or angled areas. Cables can be used for simple rectangular areas too, but mats install faster and easier in those situations.

Environmentally friendly snow and ice removal in the worst conditions is possible without using salt or hazardous chemicals. ProMelt provides energy efficiency and easy installation.

ProMelt heated snow melting cables are manufactured in the USA by SunTouch Watts Radiant (pioneers of indoor radiant heat). You choose your configuration and secure to rebar/mesh or using our Cable Strap on a base surface; maintaining proper and consistent spacing of cables is your job. Larger spacing means less heat but more coverage per cable.

Cables cost 10-15% less than mats and give you layout and heat output options since you control the spacing and determine the layout. Consider ProMelt Mats for a quicker and easier installation (the spacing is already done for you) for just a few dollars more. (See Specifications)

ProMelt is an effective, reliable and invisible snow melting system that will serve you for many years. Projects of 350 SF or less require cables and a snow sensor-controller and are very affordable and convenient.

ProMelt Snow Melting Benefits:

ProMelt cables provide versatility and allow you to control the Watts per Sq Foot between 38 and 50.
Automatically activates only when needed means your driveway and sidewalks stay clear and you never forget to turn the system off.
No plowing or scraping means your walkway and driveway look better and last longer
Maintenance Free permanent installation. Not like Hydronic systems (water) with pumps, boilers, etc
Increase safety and reduce liability with ProMelt
No hazardous chemicals to damage your landscaping or the environment
No waiting for the plow or shovel to arrive - Dependable automatic snow sensor once moisture and temperature conditions are met activates ProMelt.
Save Money - Eliminate snow removal labor costs
The best construction using premium materials means ProMelt is built to last
Increase the value of your home with an automatic ProMelt System

ProMelt Cables provide the most flexible and low cost installation than any snow melting system in 3 easy steps once you have read all instructions, planned the electrical details, and prepared your jobsite: Determine cable spacing and layout we suggest using a spacer like a piece of wood Unwind cable(s) to fit any shape area and around obstacles or up steps Secure the cable onto the prepared base surface using CableStrap or cable ties to wire mesh/rebar The ProMelt radiant heating cables are built tough for Permanent installation within virtually any surface to provide efficient melting of snow and ice automatically. They must be completely embedded and at least 1.25 inches below the top of the new layer. New Concrete Surfaces install in top 2 inches secured to rebar or wire mesh on supports/chairs New Asphalt on top of base layer. ProMelt's polyurethane outer insulation layer withstands 300 Degrees F Pavers or brick set in compacted sand beds or in mortar Stone or tile set in thickset mortar. Building Code requires all outdoor systems to be 1.25 inches below the top of the new surface Not for use in gravel or dirt - must be embedded as described above

Voltage	208 VAC
Voltage Choice	Same Energy efficiency & same Watts/SF. More Sq Footage per circuit with 240v
Watts Per SF	50 Watts per Sq Foot
Cable length in feet	238' ft. feet
Cable length in inches	2856" in. inch
Cable length in meters	72.12 m meter metre
Heat Output BTUs per SF	170 BTU per Sq Ft/Hour
Heating Power : Total BTU’s	10200 BTU total
Manufacturer	SunTouch Watts Radiant
Power Lead Type	Armored, NEC color code, Single point connection at 1 corner of mat. No return wire like inferior products
Power Lead Length	20 Feet
Power Lead Wire Gauge (varies by heated area)	14 AWG
Heating Wire Spacing	3" - 3.5" - 4" on center
Heated Area	60.0000
Weight	6.0000
Ohms Reading (resistance value)	11 - 15 ohms
ZERO* EMF (Electro Magnetic Field)	Yes. Verified by Independent Testing Laboratory as ultra low.
Controls/Thermostat is required for operation	Automated Snow Sensing Controller recommeded for safety and lower energy use
Packaging	Easy Open Cardboard - no frustration. Easy to dispense cable from spool
Width of heating area Feet	Variable - you determine layout width, length, shape