SunTouch SunStat ConnectPlus WiFi Programmable Touchscreen Thermostat
The SunStat® ConnectPlus™ Wi-Fi Programmable Touchscreen Thermostat with Alexa & Google Voice control.
This beautiful all-in-one thermostat is the latest innovation from SunTouch to control all 120 or 240 VAC floor heating systems, via its glass touch screen or voice control with Alexa or Google.
Mount the ConnectPLUS in landscape mode for a unique euro-look or to replace other horizontally mounted thermostats; can be installed in standard portrait mode also.
Floor sensor wire 15' long included.
And, the Plus is not just another pretty face - it's smart, safe, and easy to use. The Guided setup lets you easily activate a schedule for floor heating comfort to suit your lifestyle via the Watts Home mobile app or Voice commands.
Energy-saving features such as warm weather shutdown and temperature compensation are standard, and local weather conditions can also be displayed on the screen. New Wireless technology using 915 MHz (similar to BlueTooth, but not Wi-Fi) allows control of SunTouch accessories, like R4 relays or the Smart Sensor.
The ConnectPlus controls a single zone of electric floor heat and includes a built-in GFCI for safety. Achieve the best results by setting it to control the floor temperature using the included 15 Ft sensor wire and, optionally limit the floor temperature or configure to control the space through air temperature alone. The most options for control in the industry.
• Easy to use scheduling - comprehensive menus & help screens plus the app
• Designer Black Front Display - high-resolution large touchscreen shows Floor temp, or Optional Weather and Clock displays; the thermostat is white on the sides to blend with most walls. It is only available in this color.
• Thin profile on the wall - Big enough for easy use, but unobtrusive
• Voice Control with Alexa or Google - Install the Watts Home app and configure voice operation easily
• Energy Use Monitoring - shows total hours of operation - see how little energy floor heat uses.
• Landscape mount option - Easily replace older thermostat models or go for a European look
• The most safety options - GFCI Built-in, Overcurrent, Voltage-level sensing, and ammeter with diagnostic screen
• Use SunStat Relays to control additional areas - Wired or Wireless connection to SunStat 500980 R4 Relay(s) - The PLUS is also backward-compatible with Older Relay 3 models (500880 wired only), so there is no need to replace older R3 relays if you want to change an existing thermostat Gen3 model (500825,500850, or 500875)
• Add a ConnectPlus Smart Sensor - Wireless connection to measure floor temperature and detect water leakage - available now
• Home Automation Tie-In via dry contact (allows thermostat to be turned on/off by a home automation system)
• 3 year manufacturer warranty
Instructions + Video
Indoor mount only
Pull power supply wiring to the control location.
-
Leave about 6 to 8" (15 to 20 cm) of wire for connections.
-
This wiring should be size 12 or 14 AWG, in compliance with local code requirements.
-
A qualified person should run a dedicated circuit (ideal) from the main circuit breaker panel to the control location. If a dedicated circuit is not possible, it is acceptable to tap into an existing circuit. However, there must be enough capacity to handle the load (amps) of the floor heating system being installed, and any appliance likely to be used on the circuit such as a hairdryer or vacuum cleaner.
-
Always avoid circuits that have ballasted lighting, motors, exhaust fans, or hot tub pumps to reduce the likelihood of interference.
-
The circuit breaker should be rated 20 amps for total circuit loads up to 15 amps. A 15-amp circuit breaker may be used for total circuit loads up to 12 amps.
-
A GFCI (ground-fault circuit interrupter) or AFCI (arc-fault circuit interrupter) type circuit breaker may be used, but is not necessary.
Materials Required
-
Electrical box (must be UL listed and proper size)
-
Portrait: vertical 1-gang box (For multiple heating elements use a 2-gang (4x4) box with single-gang mud ring)
-
Landscape: square 2-gang box/plastic 1-gang mud ring
-
-
Conduit, flexible or rigid (if required, must be UL listed and proper size)
-
Electrical wiring cable (UL listed)
-
Minimum 14 AWG to 12 A / 12 AWG to 15 A
Â
dd
Specifications
| Size in Inches | 4.73" H x 3.11" W x 1.9" D (120 x 79 x 48 mm) |
|---|---|
| Visible Depth | .62 (5/8 inch) |
| Floor Sensor Length Ft | 15' |
| GFCI / GFEP Protection | 5 mA Class A Built In - With Test Button Feature & indicator light |
| Manual Override | Yes |
| Inside Box Depth | 1.28 inches |
More Details
| What's In The Box | Programmable Wi-Fi thermostat, sensor wire, instructions |
|---|---|
| UPC | 840213007546 |
| Warranty from Manufacturer | 3 yr |
| Manufacturer | Watts Radiant |
| Safety Listing | Safety Listed in USA & Canada : UL Listed under UL 943, UL/CSA 60730, UL 991 Listing file number E365015 |
| Maximum Setting Temp | Floor Max 99° F (37° C) , Air Max 60°: F (35° C) |
| Senses Ambient Air Temperature | Yes |
| Senses Ambient Air w/ Floor Temp option | Yes |
| Minimum Display Temp | 40° F (4.5° C) |
| Maximum Display Temp | 99° F (37° C) |
| Programming Method | 7 days |
| Thermostat Type | Wifi with Voice |