ProMelt · 2' x 5' Foot
ProMelt electric radiant snow melting mats install easily and quickly providing electrically heated driveways and walkways. Energy efficient and environmentally friendly snow and ice removal in the worst conditions is possible without using nasty chemicals or corrosive salt.
ProMelt heated snow melting mats are manufactured by SunTouch Watts Radiant (pioneers of indoor radiant heat) using superior quality snow melting cable attached to a reinforced tape grid simplifying installation while maintaining optimum spacing of cables. Plus, you can free the cable from the mat to fill in or fit steps, curved or angled spaces as needed.
ProMelt is an effective, reliable and invisible snow melting system that will serve you for many years. Typical projects of 300 SF or less simply require mats and a snow sensor-controller and are very affordable and convenient.
ProMelt Snow Melting Benefits:
- ProMelt mats install quicker and easier than cable systems with no spacing errors.
- Automatically activates only when needed means your driveway and sidewalks stay clear and you never forget to turn the system off.
- No plowing or scraping means your walkway and driveway look better and last longer.
- Maintenance Free permanent installation. Not like Hydronic systems (water) with pumps, boilers, etc
- Increase safety and reduce liability with ProMelt.
- No hazardous chemicals to damage your landscaping or the environment.
- No waiting for the plow or shovel to arrive - Dependable automatic snow sensor once moisture and temperature conditions are met activates ProMelt.
- Save Money - Eliminate snow removal labor costs.
- The best construction using premium materials means ProMelt is built to last.
- Increase the value of your home with an automatic ProMelt System.
Instructions + Video
Promelt SM5024001624 Mat 240V 2x16ft 6.7A Installation Manual
285°F (140°C) Short-term max. for asphalt covering
40°F (4.5°C)
30 or 50 Amps @ 240v, depending on controls chosen
70 A Breaker.
Attach ProMelt over cooled asphalt base layer- Cover with hand shoveled final asphalt layer min 1.5 inch thick - DO NOT DRIVE machines on exposed ProMelt. Roll with small roller or compactor.
Minimum 1.5 inches sand over cables, max paver thickness of 2.5 inches
Use chairs/dobies so rebar/Mesh ProMelt is attached to is in top 2" of slab
Maximum 2.5" total thickness over cables
Every 24" using plastic ties (no metal) for mesh, or nail through tape for surface
1.25" minimum - Check TCNA guidelines
1.5" below top of heated surface - completely covered
Minimum 6" from edge of slab or 12" for asphalt without a curb
Specifications
Manufacturer | Watts Radiant |
---|---|
Heating Power Output Total | 1300 BTU total |
Heating Power Output per Hour (BTU) | 130 BTU per Sq Ft/Hour |
EMF (Electro Magnetic Field) | Yes. Verified by Independent Testing Laboratory as ultra low. REET test |
Ohms Reading (resistance value) | 42 - 53 ohms |
Power Lead Type | Insulated, NEC color code, Single point connection at 1 corner of mat. No return wire like inferior products |
Power Lead Length | 20 Feet |
Power Lead Wire Gauge | 14 AWG |
Thickness | 1/4" in. inch |
Voltage | 120 VAC |
Spacing of Heating Wire | 3" |
Length of Heated Area (ft) | 5' ft. feet |
Length of Heated Area (in) | 60" in. inch |
More Details
Canadian Electric Code reference | Section 62 (CEC) Part I. Plus any local code requirements |
---|---|
National Electric Code reference | ANSI/NFPA 70 especially Article 426. Plus any local code requirements |
Safety Listing | ETL Listed for U.S. and Canada under UL (Underwriters Laboratory) 515, IEEE 515.1, and CAN/USA C22.2 No. 130-03 : Listing file number: 3151992 |
Size in Feet | 2' x 5' (2x5 feet) |
Size in Inches | 24" x 60" (24x60 inches) |
Size in Meters | 0.61m x 1.52m (0.61x1.52 meters) |
Warranty from Manufacturer | 10 Year backed by USA Manufacturer since 1873 |
Amp Draw | 3.2 |
Wattage per SF | 38 |
Total Watts | 380W |
Why Helps |
ProMelt Mats install faster and easier than any snow melting system in 3 easy steps once you have read all instructions, planned the electrical details, designed a layout and prepared your jobsite:
The ProMelt radiant heating mats are built tough for Permanent installation within virtually any surface to provide efficient melting of snow and ice automatically. They must be completely embedded and at least 1.25 inches below the top of the new layer.
|
Wire Construction | ETFE Fluoropolymer, Braided copper ground plane, Foil shield and Outside polyurethane jacket |