Custom TapeMat
One of the quickest installation options!
Based on the plan you provide, SunTouch makes a custom in-floor heating mat to match the curves, angles, and cut-outs of your floor.
• Installation is easy. Order a mat to fit your exact floor plan; no cuts or turns will be required.
• Simply unroll the Custom TapeMat, then apply thin-set or self-leveler to fit the mat to your floor space.
Send us a sketch of your layout and we will get you a quote in 24 hours or less!
Instructions + Video
INTERIOR floor heating application only. Embedded in mortar or self leveling concrete only.
Installation Steps:
-
Step #1
Step #2
Step #3
Plan Your Layout
Measure and draw a layout simple plan (or send it to us and let us draw a layout for you) mark your Thermostat location (starting point for mats) and what areas you want to warm. Expect to place mats everywhere you want warmth heat does not spread.Roll Out Mat(s)
Turn and cut mesh (if needed) to custom fit to your room. Attach mat to subfloor with the built-in tape then mount the SunStat and place floor temperature sensor between 2 heating wires.Cover with Mortar
Cover mats with a cement based mortar, let it cure, then install your floor covering. If you are installing tile, you can install the tile when you apply the mortar. Connect mat power leads to your thermostat in parallel.
50 Degrees F / 10 Degrees C
15 Amps
20 A Breaker
Yes, can be installed in a tiled shower. UL listed, verify local code.
Minimum 3/8" x 1/4". Dependent on tile size - verify with tile/mortar manufacturer.
Install 4-6" away from the toilet drain wax ring. It can be under the front of toilet - Approximately 20" from wall.
Specifications
UPC | 98268027419 |
---|---|
EMF (Electro Magnetic Field) | Yes. Verified by Independent Testing Laboratory as ultra low. REET test. |
Power Lead Wire Gauge | 14 AWG |
Power Lead Length | 10' |
Power Lead Type | Armored, NEC color code, Single point connection at 1 corner of mat. |
Thickness | 0.122 (less than 1/8") |
Voltage | 120 VAC |
Wattage per SF | 12 |
Spacing of Heating Wire | 3" |
Manufacturer | Watts Radiant |
Heated Area in Sq Ft typical | 10 |
More Details
Brand Name | SunTouch |
---|---|
Safety Listing | UL (Underwriters Laboratory) Listed for U.S. and Canada under UL 1673 and CAN/CSA C22.2 No. 130-03, File No. E185866 |
Warranty from Manufacturer | 25 year warranty backed by USA Manufacturer since 1873 |
What's In The Box | TapeMat, Detailed Installation Manual. Installation videos online. |
Amp Draw | 1 |
Wire Construction | ETFE Fluoropolymer, metal shield and Outside layer of PEX |
Total Watts | 120 |
Acceptable Floor Coverings | Natural Stone,Tile, Laminate, Engineered Woods, Carpet, Vinyl, Linoleum, Solid Hardwood (if you use sleepers) |
Reviews