WarmWire CableStrap is used to hold WarmWire Cables in place on the subfloor surface at the spacing you choose. All 3 spacing options 2, 2.5 and 3 inches can be maintained using this thin metal strapping.
WarmWire is typically spaced at 3 inches on center. For areas with high heat loss, the spacing can be narrowed to 2.5 inches for added warmth.
Order 1 roll of CableStrap (25 ft in length) for each 40 to 50 Square Feet of WarmWire to be installed (not linear feet of cable) WarmWire cable is sold separately.
Cut the CableStrap to length using ordinary snips. You can anchor the strap with Screws on plywood or backer board and with spray glue, hot glue, or 2-sided tape on concrete.
CableStrap is a more economical alternative to HeatMatrix Membrane.
Features
- Vertical tabs are spaced 1 inch apart
- Horizontal tabs provide extra half-inch measurements
- Thin profile
CableStrap can also be used to install ProMelt cables on top of existing concrete, although the ProMelt cable is thicker and doesn't fit the tabs as well.
Instructions + Video
Specifications
UPC | 840213080518 |
---|---|
Manufacturer | Watts Radiant |
More Details
Reviews