Nuheat Membrane · 161 sq ft (3’3'' x 49.5')

Nuheat Membrane significantly decreases the time, difficulty, floor height, weight, & cost of your installation.

Nuheat Membrane is a tile underlayment that can be installed over the entire subfloor for uncoupling, crack isolation and waterproofing purposes. It replaces the need for a second layer of plywood or concrete backer board in most tile installations.

The polypropylene plastic layer features square-shaped columns which form channels specially designed to embed and hold Nuheat Cable. The shape of Nuheat Membrane also functions as a vapor management system that allows moisture to escape from the substrate during the curing process. It's polypropylene layer is heat-welded to a non-woven polypropylene fabric that absorbs thinset and creates a strong bond to the subfloor.

Nuheat's recommended spacing in the membrane is alternating 2-3-2 pillar spacing which produces 12 watts/sqft. If you are installing over a concrete slab and require more heat, we recommend using 2-pillar spacing which produces 15 watts/sqft. The Sq footage on a Nuheat cable is meant to be at 2-3-2 spacing; i.e. an N1C050 cable heats 50 Sq Ft based on 2-3-2 spacing in the membrane. If you space it closer, it heats less area.

Add Nuheat Waterproofing seam tape for a waterproof floor system.

Additional benefits include:

•  Even floor heat distribution
•  On-site adjustments are made easily for complex floorplans
•  No need for a second layer of plywood or concrete backer boards
•  Lowers the finished floor height
•  Significantly reduces installation time & material cost of installing
--a Nuheat Cable System