SunTouch TapeMat & Wi-Fi 20 Sq Ft Radiant Floor Heating Kit (120V)
The essentials for a time-saving Wi-Fi electric floor heating system install!
• 24" Wide SunTouch TapeMat radiant floor heating mat w/ 10 ft power lead
• SunStat ConnectPlus Wi-Fi Programmable Touchscreen Thermostat - iOS and Android App available
• Sensor Wire - For sensing floor temperature is 15 feet long (inside thermostat box)
Helpful accessories to complete your installation safely and easily are available separately add them easily below - Don't forget the LoudMouth & MultiMeter!
SunTouch’s open-weave mesh TapeMat can be installed in one day. There’s no need to wait for mortar to cure overnight before laying tile.
You can achieve warm floors in four easy steps. Simply unroll and attach your mat(s), secure the floor sensor (which comes with all SunTouch thermostats), apply thin-set mortar, and install your flooring.
Additional Features & Benefits of the SunTouch TapeMat include:
• Edged with double-sided tape for fast & easy installation that adheres directly to your subfloor.
• Mortar bonds easily through mesh with the underlying material.
• Only 1/8" added floor thickness compared to typical tile installations
• Easily adjusted to accommodate curves, angles, and cut-outs
• Can be trimmed & flipped to accommodate your layout (only cut orange mesh)
• Also available in 2.5' & 3' wide rolls (30" and 36" inches)
Instructions + Video
INTERIOR floor heating application only. Embedded in mortar or self leveling concrete only.
Installation Steps:
-
Step #1
Step #2
Step #3
Plan Your Layout
Measure and draw a layout simple plan (or send it to us and let us draw a layout for you) mark your Thermostat location (starting point for mats) and what areas you want to warm. Expect to place mats everywhere you want warmth heat does not spreadRoll Out Mat(s)
Turn and cut mesh (if needed) to custom fit to your room. Attach mat to subfloor with the built-in tape then mount the SunStat and place floor temperature sensor between 2 heating wires.Cover with Mortar
Cover mats with a cement based mortar, let it cure, then install your floor covering. If you are installing tile, you can install the tile when you apply the mortar. Connect mat power leads to your thermostat in parallel.
50° Degrees F / 10° Degrees C
Mats or Wire | Supply Wire | Breaker | |||
VAC | total amps | (AWG*) | qty | type | rating |
120 | up to 12 amps | 14 | 1 | single pole | 15 or 20 A |
120 | up to 15 amps | 12 | 1 | single pole | 20 A |
240 | up to 12 amps | 14 | 1 | double pole | 15 or 20 A |
240 | up to 15 amps | 12 | 1 | double pole | 20 A |
* Recommended only. Follow local codes for wire gauge size.
15 Amps
20 A Breaker
Yes, can be installed in a tiled shower. UL listed, verify local code
Minimum 3/8" x 1/4". Dependent on tile size - verify with tile/mortar manufacturer.
Install 4-6" away from the toilet drain wax ring. It can be under the front of toilet - Approximately 20" from wall.
Specifications
UPC | 840213021610 |
---|---|
Heating Power Output Total | 820 BTU total |
Heating Power Output per Hour (BTU) | 41 BTU per Sq Ft/Hour |
EMF (Electro Magnetic Field) | Yes. Verified by Independent Testing Laboratory as ultra low. REET test |
Ohms Reading (resistance value) | 49-60 ohms |
Power Lead Wire Gauge | 18 AWG |
Power Lead Length | 10' |
Power Lead Type | Armored, NEC color code, Single point connection at 1 corner of mat. No return wire like inferior products |
Thickness | 0.122 (less than 1/8") |
Voltage | 120 VAC |
Wattage per SF | 12 |
Spacing of Heating Wire | 3" |
Manufacturer | Watts Radiant |
Heated Area in Sq Ft typical | 20 |
More Details
Brand Name | SunTouch |
---|---|
Safety Listing | UL (Underwriters Laboratory) Listed for U.S. and Canada under UL 1673 and CAN/CSA C22.2 No. 130-03, File No. E185866 |
Length of Heated Area (ft) | 10' |
Length of Heated Area (in) | 120" |
Warranty from Manufacturer | 25 Year backed by 140 year old USA Manufacturer |
What's In The Box | Mat, Wi-Fi ConnectPlus Thermostat, Floor Sensor |
Amp Draw | 2 |
Wire Construction | ETFE Fluoropolymer insulation, metal shield and Outside layer of PEX combined with heating elements |
Total Watts | 240 watts |
Size in Feet | 2' x 10' |
Size in Inches | 24" x 120" |
Size in Meters | 0.61m x 3.05m |
Acceptable Floor Coverings | Natural Stone,Tile, Laminate, Engineered Woods, Carpet, Vinyl, Linoleum, Solid Hardwood (if you use sleepers) |
Reviews