DITRA-HEAT WiFi CONFIGURABLE KIT
Instructions + Video
All substrates must be clean, even, and load bearing. Bond inhibiting surfaces must be removed prior to the application of DITRA-HEAT. For complete installation guidelines and warranty criteria, please refer to the downloadable Instruction Manual (↖ linked above) or to the installation video online.
Note: Type, thickness, and format of the tile or stone surface covering must be at least 2" x 2" (5 cm x 5 cm).
ddINTERIOR floor heating application only. Embedded in mortar or self leveler only
15 amps
20 A breaker
Minimum of 7" from the centerline of the toilet drain
Specifications
Safety Listing | Listed under CAN/CSA-C22.2 No. 130-03. |
---|---|
Voltage | 120 VAC |
Wattage per SF | 12.75 |
Spacing of Heating Wire | 3-stud and 3-2-3-2-stud spacing. (Tension loop can be made around a single stud if necessary. See installation handbook for details.) |
More Details
Brand Name | DITRA-HEAT |
---|---|
Acceptable Floor Coverings | Tile, Natural Stone |
Spacing between runs 1 | 3 stud spacing |
Spacing between runs 2 | 3-2-3-2 stud spacing |
Watts Per SF 1 | 12.7 |
Watts Per SF 2 | 15.2 |
BTUs/SF/Hr 1 | 43.2 |
Reviews
Customer Reviews
I was a little confused as to what I needed to order, so I called Warm Your Floor and spoke with Omar. He had me email him a diagram of what I was doing, and he customized the heating cable, floor membrane sheets, and thermostat to my job, so I didn't order too much or too little. The installer was really impressed when the heating cable stopped exactly where it was supposed to. I am a fan...Kudos.