Details
Warm & protect your floor at the same time!
DITRA-HEAT by Schluter-Systems integrates electric floor warming with the functions associated with DITRA:
uncoupling, waterproofing, vapor management and support to ensure a long lasting installation under tile or stone floors.
• DITRA-HEAT combines the flexibility of loose heating cables with the ease of installation of mat systems.
• Cables can be snapped into place wherever heat is desired, without creating height differences in the floor.
• Self-leveling compounds are not required to encapsulate the cables, significantly reducing installation time and effort.
KERDI-BAND (sold separately) can be used to cover all joints, seams and corners of the membrane to completely waterproof before applying thin-set and tile.
- Instructions + Video
-
Instructions + Video
Instruction Manual DITRA-HEAT Installation Handbook VIDEO Install Steps Ensure your sub floor is clean, even, and load bearing. Bond inhibiting surfaces must be removed prior to the application of DITRA-HEAT. For complete installation guidelines and warranty criteria, please refer to the included instruction manual or at the link displayed above.
Note: Type, thickness, & format of the tile/stone covering must be at least 2" x 2" (5 x 5 cm).
Layout Flexibilty Can be cut to fit any layout. Be sure to seal joints and seams with KERDI-BAND (sold separately). Indoor/Outdoor? For INDOOR USE ONLY Acceptable Sub-Floors Installs overtop plywood or concrete. (Can act as a replacement for backer board). Trowel type Recommended 11/64" x 11/64" DITRA Trowel (SKU# TRL-DIT6) Schluter®-DITRA-HEAT: Overview
- Specifications
-
Specifications
UPC 4011832142192 Manufacturer Schluter-Systems Size in Inches 39" x 493" Size in Feet 3' 3" x 41' 1" Size in Meters 0.99 x 12.52 meters - More Details
-
More Details
What's In The Box (1) 134.5 sq ft roll of DITRA HEAT-MEMBRANE Warranty 10 year limited manufacturer warranty Amp Draw 2.8 Custom Size Options Custom sizes not available. Acceptable Floor Coverings Tile, Natural Stone
You might also like...
-
KERDI-DRAIN KIT with 2" PVC Flange & 4" Stainless Steel Grate
Retail: $126.80
You Save: $12.68
$114.12
-
KERDI-BOARD SHOWER NICHE 12" X 12"
Retail: $65.28
You Save: $6.53
$58.75
-
KERDI-SHOWER-KIT 32" x 60" Centered Stainless Steel Drain with PVC Flange
Retail: $569.94
You Save: $56.99
$512.95
-
DITRA-HEAT-TB Insulated Membrane Roll 108 sq ft, 3'3" x 33'
Retail: $375.00
You Save: $37.50
$337.50
Reviews
-
A great solution
These panels worked perfect as an underlayment for our new tile floor with a warm floor heating system. They are a bit hard to cut, but this is a minor issue. Check out the youtube videos of professional installations for good tips. -
works as advertised
These sheets adhered well to the floor and held the heating cable in place as there were designed to. They made installing the cable easy.
I was a little confused as to what I needed to order, so I called Warm Your Floor and spoke with Omar. He had me email him a diagram of what I was doing, and he customized the heating cable, floor membrane... -
Good Product
I used this with (2 - WarmWire 140 Sq Ft 240V Radiant Floor Heating Cable 3.0)
Product is a bit difficult to work with if you do not keep these things in mind :
1.) The ends want to curl up when you put it down over your thinset.
2.) You cannot change the orientation of the layout once you start UNLESS you trim the excess on the long... -
Excellent Substrate
I am an electrical contractor and just completed two floors with the Ditra heat product. I will now use this everytime. Very easy to insrall the Ditra with a utility knife and thinset. Installing the heat cable is very easy because it snaps into place which puts it below the top of the mat. So you get to skip the steps of attaching the cable to...
Have a question?
Check out our Knowledge Centeror give us a call!
1-866-558-3369Mon - Fri 6:00am to 5:00pm PST
