Custom TapeMat

100% of 100
Availability: In stock
Fetching Price..
Need help selecting voltage or coverage area? Take a look at our Quick Guide

One of the quickest installation options!

Based on the plan you provide, SunTouch makes a custom in-floor heating mat to match the curves, angles, and cut-outs of your floor.

  Installation is easy. Order a mat to fit your exact floor plan; no cuts or turns will be required.
  Simply unroll the Custom TapeMat, then apply thin-set or self-leveler to fit the mat to your floor space.

Send us a sketch of your layout and we will get you a quote in 24 hours or less!


Indoor / Outdoor

INTERIOR floor heating application only. Embedded in mortar or self leveling concrete only.

Install Steps

Minimum Installation Temperature

50 Degrees F / 10 Degrees C

Maximum Circuit Load

15 Amps

Maximum Circuit Overload Protection

20 A Breaker

Shower Installation

Yes, can be installed in a tiled shower. UL listed, verify local code.

Trowel Size recommended

Minimum 3/8" x 1/4". Dependent on tile size - verify with tile/mortar manufacturer.

Distance from Toilet

Install 4-6" away from the toilet drain wax ring. It can be under the front of toilet - Approximately 20" from wall.

UPC 98268027419
EMF (Electro Magnetic Field) Yes. Verified by Independent Testing Laboratory as ultra low. REET test.
Power Lead Wire Gauge 14 AWG
Power Lead Length 10'
Power Lead Type Armored, NEC color code, Single point connection at 1 corner of mat.
Thickness 0.122 (less than 1/8")
Voltage 120 VAC
Wattage per SF 12
Spacing of Heating Wire 3"
Manufacturer Watts Radiant
Heated Area Size Covered 10
Brand Name SunTouch
Safety Listing UL (Underwriters Laboratory) Listed for U.S. and Canada under UL 1673 and CAN/CSA C22.2 No. 130-03, File No. E185866
Warranty from Manufacturer 25 year warranty backed by USA Manufacturer since 1873
What's In The Box TapeMat, Detailed Installation Manual. Installation videos online.
Amp Draw 1
Wire Construction ETFE Fluoropolymer, metal shield and Outside layer of PEX
Total Watts 120
Why Helps

SunTouch = Zero EMF

An emerging issue in the electric radiant heat industry is EMF (electromagnetic field) radiation. SunTouch pioneered and sells only ZERO EMF products constructed with active dual wire EMF-canceling technology.

All SunTouch products use a complex wire construction with two heating elements in parallel with an added and patented helical twist to eliminate EMF. Other electric radiant floor heating companies sell single-wire systems that release high levels of EMF when compared to SunTouch.

What is EMF? Electromagnetic fields (EMF) come from all electrical appliances, but studies show an average American's daily exposure is less than 1 unit (mG) of EMF. But. when you sit on an unshielded electric radiant floor, you may be exposed to 20, 40, or more times the average daily exposure. This Data comes from Independent testing.

Is limiting exposure to EMF important? No one is certain. The World Health Organization says the data is inconclusive to date, but continues their research. We provide this EMF information because it is important to some people, not to frighten you or exaggerate any risk.

For many years customers have chosen SunTouch Zero EMF systems, but we leave the choice to you after explaining what we do know.

Acceptable Floor Coverings Natural Stone,Tile, Laminate, Engineered Woods, Carpet, Vinyl, Linoleum, Solid Hardwood (if you use sleepers)
Write Your Own Review
You're reviewing:Custom TapeMat 10 SqFt 120V
Your Rating
Customers also purchased