Schluter DITRA-HEAT Kit with 27 sq ft Cable, 43 sq ft Membrane, Non-Programmable Thermostat (120V)
DITRA-HEAT combines the flexibility of loose heating cables with the ease of installation of mat systems.
Cables easily snap into place wherever heat is desired, which significantly reduces installation time and effort.
Since this eliminates any height differences, simply place self-leveler over the top for a perfectly level flooring installation.
This DITRA-HEAT Kit contains everything you need to install a complete floor heating system under tile or stone:
• 1 Spool of DITRA-HEAT Cable (DHEHK12027) - Warms 27 sq ft
• 1 DHERT103/BW Non-Programmable Thermostat (push-button)
• 2 Sensor Wires - one in each the thermostat & heating cable box
• 5 DITRA-HEAT Uncoupling Membrane Sheets - Covers 43 sq ft
Revolutionary DITRA-HEAT membrane by Schluter-Systems integrates electric floor warming with the functions associated with DITRA:
uncoupling, waterproofing, vapor management and support which eliminated common causes of cracking ensuring a long lasting installation under tile or stone.
Note: Product shown is a kit put together by Authorized Distributor Warm Your Floor containing individual genuine Schluter® products.
Instructions + Video
Ensure your sub floor is clean, even, and load bearing. Bond inhibiting surfaces must be removed prior to the application of DITRA-HEAT. For complete installation guidelines and warranty criteria, please refer to the included instruction manual or at the link displayed above.
Note: Type, thickness, & format of the tile/stone covering must be at least 2" x 2" (5 x 5 cm).
ddFor INDOOR USE ONLY
15 amps
Specifications
| Safety Listing | UL Listed |
|---|---|
| Voltage | 120V |
| Cable Length | 88.2 feet |
| Cable Length (inches) | 1,058.4 inches |
| Cable Length (meters) | 26.9 meters |
| Heated Area in Sq Ft typical | 27 Square Feet |
| Wattage per SF | 12.75 |
| Total Watts | 338 Watts |
| Amp Draw | 2.8 |
| Heating Power Output per Hour (BTU) | 1153.3 |
| Spacing of Heating Wire | 3-stud and 3-2-3-2-stud spacing. (Tension loop can be made around a single stud if necessary. See installation handbook for details.) |
| Thickness | ~ 0.25 inches |
More Details
| What's In The Box | 5 Sheets DITRA-HEAT Membrane, 1 DHEHK12027 Cable, 2 sensors, 1 Non-Programmable Push-Button Thermostat (DHERT103/BW) |
|---|---|
| Brand Name | DITRA-HEAT |
| Warranty from Manufacturer | 10-25 year limited manufacturer warranty |
| Spacing between runs 1 | 3 stud spacing |
| Spacing between runs 2 | 3-2-3-2 stud spacing |
| Heated SF 1 | 26.7 |
| Heated SF 2 | 22.2 |
| Watts Per SF 1 | 12.7 |
| Watts Per SF 2 | 15.2 |
| BTUs/SF/Hr 1 | 43.2 |
Reviews
Customer Reviews
I was a little confused as to what I needed to order, so I called Warm Your Floor and spoke with Omar. He had me email him a diagram of what I was doing, and he customized the heating cable, floor membrane sheets, and thermostat to my job, so I didn't order too much or too little. The installer was really impressed when the heating cable stopped exactly where it was supposed to. I am a fan...Kudos.
