WarmWire Kit

SKU: WarmWire Kit
Need help selecting voltage or coverage area? Take a look at our Quick Guide

WarmWire Kits are an affordable alternative to floor heating mats.

Heating cable systems like WarmWire by SunTouch offer increased freedom in your install, allowing you to easily go around seemingly awkward turns & other obstructions such as a toilets, kitchen islands, or floor vents invloved in your layout.

This kit contains the following components:

•  SunStat Command Programmable Thermostat
•  Spool(s) of WarmWire radiant heating cable
•  Roll(s) of CableStrap (for securing cable to subfloor)
•  Floor Sensor Wire (10k)
•  Wire nuts & miniature screwdrivers
  LoudMouth Installation Monitor/Alarm
 Installation Manual
  Roll of Tape

WarmWire works wonderfully under natural stone, tile, laminate, engineered woods, carpet, vinyl, linoleum, & solid hardwood (if you use sleepers).  They are also approved for shower installation where permitted by the local authority having jurisdiction (AHJ).

(Compatible for install at 2 ½, 3, or 3 ½ inch spacing)

Instructions + Video

Instruction Manual Link

WarmWire Cable Installation Manual

Video

Indoor / Outdoor

Install Steps

Minimum Installation Temperature

Power Supply & Wiring

Maximum Circuit Load

Maximum Circuit Overload Protection

Shower Installation

Trowel Size recommended

Distance from Toilet

Specifications

UPC 840213195434
Heating Power Output Total 410 BTU total
Heating Power Output per Hour (BTU) 41 BTU per Sq Ft/Hour at 3" spacing
EMF (Electro Magnetic Field) Yes. Verified by Independent Testing Laboratory as ultra low.
Ohms Reading (resistance value) 108-134
Power Lead Wire Gauge 18 AWG
Power Lead Length 10 Feet
Power Lead Type Armored, NEC color code, Single point connection at 1 corner of mat. No return wire like inferior products
Thickness .110" - .132" (nominal) Shorter cables are thinner.
Voltage 120 VAC
Wattage per SF 12
Spacing of Heating Wire 2.5" - 3" - 3.5" on center
Manufacturer Watts Radiant
Heated Area in Sq Ft typical 10

More Details

Brand Name WarmWire
Safety Listing UL (Underwriters Laboratory) Listed for U.S. and Canada under UL 1673 and CAN/CSA C22.2 No. 130-03, File No. E185866
Warranty from Manufacturer 25 year warranty backed by USA Manufacturer since 1873
What's In The Box WarmWire Spool(s), Coil(s) strap, SunStat Command Programmable Touch Screen Thermostat, Sensor Wire, LoudMouth, Tape, Digital Digital Multimeter, Detailed Installation Manual.
Amp Draw 1
Wire Construction
Total Watts 120 watts
Acceptable Floor Coverings Natural Stone,Tile, Laminate, Engineered Woods, Carpet, Vinyl, Linoleum, Solid Hardwood (if you use sleepers)

Reviews

Customer Reviews

Overall
great floor heating kit
Review by
We installed this kit 4 years ago and are still pleased with the product and warmth!
Overall
Excellent !!
Review by
Great product, works as advertised. Extremely happy with the value as well. Compared prices extensively, but this was the best by far. Installation is a bit tedious, but this is not the first electric floor we've installed (DIY) so we were prepared. I fact, this product was easier in many ways than the one installed 8 years ago (different brand). Very happy overall! Well worth the investment!
Overall
Use it on every bathroom I do
Review by
Very versatile product. I order the kit that corresponds with the square footage of the bath I'm doing. I do the math for length of wire per 10 square feet as I'm laying the wire out. Then I pore a floor leveler to protect the wire and reduce labor on tile setting.
One very important step is to use a deep remodel box for the thermostat, the amount of wires that go into the box can make the thermostat malfunction.
Overall
Great product. Customers love it.
Review by
Great product. Customers love it.
Overall
Excellent!!!
Review by
Excellent!!! Great product. Easy to install. 100% satisfied.
Thank you
per page
Write Your Own Review
You're reviewing: WarmWire Kit
Loading...

You submitted your review for moderation.