50ft Connection wire spool between DS Controller and CDP-2 remote

CS-50 Remote Interconnect Cable

High quality cabling for sensor-to-remote connection is critical.

This cable features foil shielding to improve noise immunity, and tinned, stranded leads to reduce corrosion and assure good connections long term. Don't take a chance with telephone wire, CAT5 cable, thermostat wire, or similar. Use the cable that ensures integrity. Buy CS cable sets.

Will Cat5 cable work? Yes, but is it the best choice for long-term performance - NO.

The most important link between a DS Series sensor and the CDP wired remote control/monitor interface is a reliable, high-quality cable. Bare copper wires will quickly tarnish in outdoor weather, exhibiting erratic and unreliable performance. Make the wire a solid conductor and dependability declines even more. Telephone wire, thermostat wire, and CAT 5 are NOT the answer.

The CS Cable Sets are the answer. Our wire is tinned for low tarnish and corrosion. It is stranded for stronger, more reliable connections into the terminal blocks. It is shielded for higher noise immunity. All contribute to years of trouble-free operation. The cable is available in 50 foot (CS-50), 100 foot (CS-100), and 200 foot (CS-200) reels at very affordable, competitive prices.

CS-50/CS-100/CS-200 Remote Interconnect Cable

• Corrosion & Tarnish Resistant
• Shielded for High Noise Immunity
• Maintains Good Long-Term Contact With Spring Clamp Terminals
• 300V Insulation Rating for Safety Near Line Voltage