Nuheat Cable is an Electric Radiant Floor Heating system designed to allow installers to customize the layout instantly making adjustments to the floor heating coverage for any room. The flexible installation method lets you heat floors with curves or angles and work around obstructions like floor heating vents.
Nuheat Cable is an alternative to Custom Nuheat Mats, but takes more time, effort and thought since you determine and customize the layout as you go. Like Nuheat Mats, Nuheat Cables are approved for use in wet areas including shower floors and seats.
Nuheat Cable kits include enough cable guides for installation and extras are available for purchase. A Nuheat thermostat is required and sold separately.
Yes, can be installed in a tiled shower.
INTERIOR floor heating Application only. Embedded in Mortar only
20 A Breaker.
Install 4 - 6 inches away; can be under front of toilet. Approx 20" from wall
minimum 3/8" x 1/4". Works for most ceramic tile; verify with tile/mortar manufacturer
50 Degrees F / 10 Degrees C
|Cable Length||528.7' ft. feet|
|Cable Length (inches)||6344.4"in. inches|
|Cable Length (meters)||161.25m|
|Heated Area Size Covered||135|
|Wattage per SF||12|
|Total Watts||1620 watts|
|Heating Power Output per Hour (BTU)||41 BTU per Sq Ft/Hour|
|Heating Power Output Total||5535 BTU total|
|Spacing of Heating Wire||3" on center only|
|Power Lead Length||11 Feet|
|Power Lead Wire Gauge||18 AWG|
|Power Lead Type||TEW Wire with Stainless Steel ground braid rated to 105 C and 300v max.|
|Ohms Reading (resistance value)||35 (Range is 33-39 ohms) Nuheat ohms range is -5% to +10%|
|EMF (Electro Magnetic Field)||Zero EMF|
|What's In The Box||(1) 528.7ft spool of cable, 96 cable guides|
|Warranty from Manufacturer||25 years|
|Acceptable Floor Coverings||Tile, Stone,Granite, Marble, Slate, Engineered wood, Laminate|