Details
Nuheat standard size pre-built floor heat mats come ready to fit the room and will keep almost any flooring at a warm and comfortable temperature that you set on the Nuheat thermostat control.
You can use more than one Nuheat mat combined to fit any room size or shape, up to the amp limit of the thermostat (150 SF for 120v / 300 SF for 240v Mats). All Mats connect to the Thermostat, not to each other.
Nuheat mats are like electric blankets - you choose the size or sizes to cover your desired floor area - or ask for our expert assistance at NO OBLIGATION. The mats cannot be cut or altered - so choose the right size - we can help.
- Specifications
-
Specifications
UPC 620713000137 Voltage 120 VAC Amp Draw 2.5 Wattage per SF 12 Watts per Sq Foot Total Watts 300 watts Heating Power Output per Hour (BTU) 41 BTU per Sq Ft/Hour Heating Power Output Total 1025 BTU total Power Lead Type TEW Wire with Stainless Steel ground braid rated to 105 C and 300v max. Power Lead Length 10 Feet Power Lead Wire Gauge 18 AWG Thickness Mat is .083, total is 1/8" with thinset underneath. Full Length End-to-End ground wire Yes. Spacing of Heating Wire 2.0" inches Minimum Bend Radius 0.625" inch Resistance Value 46 - 53 ohms Thermostat Control Required? Nuheat Floor sensing thermostat Conduit Required? Nuheat mats require conduit - Instructions + Video
-
Instructions + Video
Instruction Manual Nuheat F1515 Mat 120V 60" x 60" F1515 Installation Manual VIDEO Install Steps Nuheat mats are squares and rectangles in over 120 sizes and will fit any room regardless of shape or size. When installing your floor, the heating mats are set in a thin spread of mortar (the same bonding materials used to lay your tile floor). Once your subfloor is prepared, and you have installed the Nuheat mat, apply another layer of thinset or mortar, lay your tile as usual and make the final connection to the Nuheat Thermostat control.
Laminate & Engineered Hardwood: simply install the Nuheat mat as above. Next, cover the Nuheat mat with at least 1/4 inch mortar or floor leveling cement. Once the mortar has cured, install your floor according to the flooring manufacturer's instructions.
Skill Level Installation only by qualified persons. Electrician recommended for wiring. Maximum Circuit Load 15 Amps Maximum Circuit Overload Protection 20 A Breaker. GFCI / GFEP Protection Required for each circuit. Built-in to all Nuheat thermostats. Electrical Box Size Extra-deep single-gang box for 1 or 2 leads, Or 4" square deep box for 3 cables (extra room needed for Wire, wire nuts, control). Harmony requires 4" box. Shower Installation Yes, can be installed in a tiled shower. Layout Flexibilty Yes. Contact us for more information. Expected Floor Temperature This is dependent on many factors. A well-insulated floor can ensure better performance. Insulation Recommended Yes; under slabs or framed floors. Cork or similar on top of Concrete Subfloor as thermal break Indoor/Outdoor? INTERIOR floor heating Application only. Embedded in Mortar only Acceptable Sub-Floors On TOP of Sub Floor (Plywood, backer board, or concrete) Distance from Toilet Install 4 - 6 inches away; can be under front of toilet. Approx 20" from wall Trowel Size recommended minimum 3/8" x 1/4". Works for most ceramic tile; verify with tile/mortar manufacturer Trowel type Recommended Heavy Duty Plastic PRO-Trowel Cut Warning No. Never cut the heating elements to shorten Minimum Install Temperature 50° Degrees F / 10° Degrees C Nuheat Mats Installation Video
- More Details
-
More Details
What's In The Box Nuheat Mat, Complete instructions. Installation videos online. Warranty 25 year warranty Wire Construction Copper/Copper Alloy Heating wire insulated with ETFE and surrounded with protective Stainless steel ground shield. Size in Inches 60" x 60" (60x60 inches) Size in Feet 5' x 5' (5x5 feet) Size in Meters 1.52m x 1.52m (1.52x1.52 meters) Custom Size Options Yes, custom mats available upon request Safety Listing UI (US) 1693; UL (CAN/CSA) C22.2 #217; NEC Article 424 Floor Warming Systems Repair Information Yes, Wire can be repaired. Repair kits and assistance available.
You might also like...
-
Nuheat Shower Mat • 32" x 32" (120V)
Retail: $213.25
You Save: $22.25
$191.00
-
KERDI-DRAIN KIT with 2" PVC Flange & 4" Stainless Steel Grate
Retail: $126.80
You Save: $12.68
$114.12
-
KERDI-SHOWER-KIT 32" x 60" Centered Stainless Steel Drain with PVC Flange
Retail: $569.94
You Save: $56.99
$512.95
-
SunStat Connect WiFi Enabled Programmable Thermostat
$270.00
Have a question?
Check out our Knowledge Centeror give us a call!
1-866-558-3369Mon - Fri 6:00am to 5:00pm PST
