Nuheat Mat · 118" x 36" (240V)

700% of 100
Availability: In stock
$398.25 You Save: $40.25 $358.00
+ Free Shipping!

Nuheat standard size pre-built floor heat mats come ready to fit the room and will keep almost any flooring at a warm and comfortable temperature that you set on the Nuheat thermostat control.

You can use more than one Nuheat mat combined to fit any room size or shape, up to the amp limit of the thermostat (150 SF for 120v / 300 SF for 240v Mats). All Mats connect to the Thermostat, not to each other.

Nuheat mats are like electric blankets - you choose the size or sizes to cover your desired floor area - or ask for our expert assistance at NO OBLIGATION. The mats cannot be cut or altered, so be sure to choose the right size. We can help with that!

Install Steps

Nuheat mats are squares and rectangles in over 120 sizes and will fit any room regardless of shape or size. When installing your floor, the heating mats are set in a thin spread of mortar (the same bonding materials used to lay your tile floor). Once your subfloor is prepared, and you have installed the Nuheat mat, apply another layer of thinset or mortar, lay your tile as usual and make the final connection to the Nuheat Thermostat control.

Laminate & Engineered Hardwood: simply install the Nuheat mat as above. Next, cover the Nuheat mat with at least 1/4 inch mortar or floor leveling cement. Once the mortar has cured, install your floor according to the flooring manufacturer's instructions.

Minimum Installation Temperature

50° Degrees F / 10° Degrees C

Maximum Circuit Load

15 Amps

Maximum Circuit Overload Protection

20 A Breaker.

Distance from Toilet

Install 4 - 6 inches away; can be under front of toilet. Approx 20" from wall

Shower Installation

Yes, can be installed in a tiled shower.

Trowel Size recommended

minimum 3/8" x 1/4". Works for most ceramic tile; verify with tile/mortar manufacturer

UPC 620713001110
Safety Listing UI (US) 1693; UL (CAN/CSA) C22.2 #217; NEC Article 424 Floor Warming Systems
Voltage 240 VAC
Ohms Reading (resistance value) 155 - 179 ohms
Spacing of Heating Wire 2.0" inches
Heated Area Size Covered 29.5
Size in Feet 9.83' x 3' (9.83x3 feet)
Size in Inches 118" x 36" (118x36 inches)
Size in Meters 3m x 0.91m (3x0.91 meters)
Thickness Mat is .083, total is 1/8" with thinset underneath.
Amp Draw 1.5
Wattage per SF 12
Heating Power Output per Hour (BTU) 41 BTU per Sq Ft/Hour
Heating Power Output Total 1209.5 BTU total
Power Lead Length 10 Feet
Power Lead Type TEW Wire with Stainless Steel ground braid rated to 105 C and 300v max.
Power Lead Wire Gauge 18 AWG
What's In The Box Nuheat Mat, Complete instructions. Installation videos online.
Brand Name Nuheat
Warranty from Manufacturer 25 year warranty
Wire Construction Copper/Copper Alloy Heating wire insulated with ETFE and surrounded with protective Stainless steel ground shield.
Length of Heated Area (ft) 3' ft. feet
Length of Heated Area (in) 36" in. inch
Total Watts 354 watts
Indoor / Outdoor INTERIOR floor heating Application only. Embedded in Mortar only
Write Your Own Review
You're reviewing:Nuheat Mat · 118" x 36" (240V)
Your Rating
Customers also purchased