SunTouch TapeMat 30" x 16' (120V)

Rating:
80% of 100
Availability: In stock
SKU
12001630
$473.00 You Save: $47.00 $426.00
+ Free Shipping!

Save valuable time on your electric floor heating installation!

SunTouch’s open-weave mesh TapeMat can be installed in one day. There’s no need to wait for mortar to cure overnight before laying tile.
You can achieve warm floors in four easy steps. Simply unroll and attach your mat(s), secure the floor sensor (comes with all SunTouch thermostats), apply thin-set mortar, and install your flooring.

  Edged with double-sided tape for fast & easy installation that adheres directly to your subfloor.
  Mortar bonds easily through mesh with the underlying material.
  Only 1/8" added floor thickness compared to typical tile installations
  Easily adjusted to accommodate curves, angles, and cut-outs
  Can be trimmed & flipped to accommodate your layout (only cut orange mesh)
  Also available in 2' & 3' wide rolls

Video

Minimum Installation Temperature

50 Degrees F / 10 Degrees C

Power Supply & Wiring

Mats or WireSupply WireBreaker
VACtotal amps(AWG*)qtytyperating
120up to 12 amps141single pole15 or 20 A
120up to 15 amps121single pole
20 A
240up to 12 amps141double pole15 or 20 A
240up to 15 amps121double pole20 A

* Recommended only. Follow local codes for wire gauge size.

Maximum Circuit Load

15 Amps

Maximum Circuit Overload Protection

20 A Breaker

Distance from Toilet

Install 4 - 6 inches away; can be under front of toilet. Approx 20" from wall

Shower Installation

Yes, can be installed in a tiled shower. UL listed, verify local code.

UPC 840213034931
Manufacturer Watts Radiant
Safety Listing UL (Underwriters Laboratory) Listed for U.S. and Canada under UL 1673 and CAN/CSA C22.2 No. 130-03, File No. E185866
Voltage 120 VAC
Ohms Reading (resistance value) 25-32 ohms
Spacing of Heating Wire 3"
Heated Area Size Covered 40
Size in Feet 2.5' x 16' (2.5x16 feet)
Size in Inches 30" x 192" (30x192 inches)
Size in Meters 0.76m x 4.88m (0.76x4.88 meters)
Thickness 0.122 (less than 1/8")
Amp Draw 4
Wattage per SF 12
Heating Power Output per Hour (BTU) 41 BTU per Sq Ft/Hour
Heating Power Output Total 1640 BTU total
Power Lead Length 10'
Power Lead Type Armored, NEC color code, Single point connection at 1 corner of mat. No return wire like inferior products
Power Lead Wire Gauge 18 AWG
What's In The Box Classic Mat, Detailed Installation Manual. Installation videos online.
Brand Name SunTouch
Warranty from Manufacturer 25 year warranty backed by USA Manufacturer since 1873
Why Helps

SunTouch = Zero EMF

An emerging issue in the electric radiant heat industry is EMF (electromagnetic field) radiation. SunTouch pioneered and sells only ZERO EMF products constructed with active dual wire EMF-canceling technology.

All SunTouch products use a complex wire construction with two heating elements in parallel with an added and patented helical twist to eliminate EMF. Other electric radiant floor heating companies sell single-wire systems that release high levels of EMF when compared to SunTouch.

What is EMF? Electromagnetic fields (EMF) come from all electrical appliances, but studies show an average American's daily exposure is less than 1 unit (mG) of EMF. But. when you sit on an unshielded electric radiant floor, you may be exposed to 20, 40, or more times the average daily exposure. This Data comes from Independent testing. Read More Here

Is limiting exposure to EMF important? No one is certain. The World Health Organization says the data is inconclusive to date, but continues their research. We provide this EMF information because it is important to some people, not to frighten you or exaggerate any risk.

For many years customers have chosen SunTouch Zero EMF systems, but we leave the choice to you after explaining what we do know.

EMF (Electro Magnetic Field) Yes. Verified by Independent Testing Laboratory as ultra low. REET test
Acceptable Floor Coverings Natural Stone,Tile, Laminate, Engineered Woods, Carpet, Vinyl, Linoleum, Solid Hardwood (if you use sleepers)
Wire Construction ETFE Fluoropolymer, metal shield and Outside layer of PEX
Length of Heated Area (ft) 16' ft. feet
Length of Heated Area (in) 192" in. inch
Total Watts 480 watts
Indoor / Outdoor INTERIOR floor heating Application only. Embedded in Mortar or self leveling concrete only
Write Your Own Review
You're reviewing:SunTouch TapeMat 30" x 16' (120V)
Your Rating
Customers also purchased