SunTouch’s open-weave mesh TapeMat can be installed in one day. There’s no need to wait for mortar to cure overnight before laying tile.
You can achieve warm floors in four easy steps. Simply unroll and attach your mat(s), secure the floor sensor (comes with all SunTouch thermostats), apply thin-set mortar, and install your flooring.
• Edged with double-sided tape for fast & easy installation that adheres directly to your subfloor.
• Mortar bonds easily through mesh with the underlying material.
• Only 1/8" added floor thickness compared to typical tile installations
• Easily adjusted to accommodate curves, angles, and cut-outs
• Can be trimmed & flipped to accommodate your layout (only cut orange mesh)
• Also available in 2' & 3' wide rolls
50 Degrees F / 10 Degrees C
|Mats or Wire||Supply Wire||Breaker|
|120||up to 12 amps||14||1||single pole||15 or 20 A|
|120||up to 15 amps||12||1||single pole||20 A|
|240||up to 12 amps||14||1||double pole||15 or 20 A|
|240||up to 15 amps||12||1||double pole||20 A|
* Recommended only. Follow local codes for wire gauge size.
20 A Breaker
Install 4 - 6 inches away; can be under front of toilet. Approx 20" from wall
Yes, can be installed in a tiled shower. UL listed, verify local code.
|Safety Listing||UL (Underwriters Laboratory) Listed for U.S. and Canada under UL 1673 and CAN/CSA C22.2 No. 130-03, File No. E185866|
|Ohms Reading (resistance value)||22-28 ohms|
|Spacing of Heating Wire||3"|
|Heated Area Size Covered||45|
|Size in Feet||2.5' x 18' (2.5x18 feet)|
|Size in Inches||30" x 216" (30x216 inches)|
|Size in Meters||0.76m x 5.49m (0.76x5.49 meters)|
|Thickness||0.122 (less than 1/8")|
|Wattage per SF||12|
|Heating Power Output per Hour (BTU)||41 BTU per Sq Ft/Hour|
|Heating Power Output Total||1845 BTU total|
|Power Lead Length||10'|
|Power Lead Type||Armored, NEC color code, Single point connection at 1 corner of mat. No return wire like inferior products|
|Power Lead Wire Gauge||18 AWG|
|What's In The Box||Classic Mat, Detailed Installation Manual. Installation videos online.|
|Warranty from Manufacturer||25 year warranty backed by USA Manufacturer since 1873|
SunTouch = Zero EMF
An emerging issue in the electric radiant heat industry is EMF (electromagnetic field) radiation. SunTouch pioneered and sells only ZERO EMF products constructed with active dual wire EMF-canceling technology.
All SunTouch products use a complex wire construction with two heating elements in parallel with an added and patented helical twist to eliminate EMF. Other electric radiant floor heating companies sell single-wire systems that release high levels of EMF when compared to SunTouch.
What is EMF? Electromagnetic fields (EMF) come from all electrical appliances, but studies show an average American's daily exposure is less than 1 unit (mG) of EMF. But. when you sit on an unshielded electric radiant floor, you may be exposed to 20, 40, or more times the average daily exposure. This Data comes from Independent testing. Read More Here
Is limiting exposure to EMF important? No one is certain. The World Health Organization says the data is inconclusive to date, but continues their research. We provide this EMF information because it is important to some people, not to frighten you or exaggerate any risk.
For many years customers have chosen SunTouch Zero EMF systems, but we leave the choice to you after explaining what we do know.
|EMF (Electro Magnetic Field)||Yes. Verified by Independent Testing Laboratory as ultra low. REET test|
|Acceptable Floor Coverings||Natural Stone,Tile, Laminate, Engineered Woods, Carpet, Vinyl, Linoleum, Solid Hardwood (if you use sleepers)|
|Wire Construction||ETFE Fluoropolymer, metal shield and Outside layer of PEX|
|Length of Heated Area (ft)||18'|
|Length of Heated Area (in)||216"|
|Total Watts||540 watts|
|Indoor / Outdoor||INTERIOR floor heating Application only. Embedded in Mortar or self leveling concrete only|