SunTouch TapeMat 30"x 56' (240V)
Availability:
In stock
SKU
24005630ST
$1,685.30
You Save: $240.42
$1,444.88
+ Free Shipping!
Save valuable time on your electric floor heating installation!
SunTouch’s open-weave mesh TapeMat can be installed in one day. There’s no need to wait for mortar to cure overnight before laying tile.
You can achieve warm floors in four easy steps. Simply unroll and attach your mat(s), secure the floor sensor (comes with all SunTouch thermostats), apply thin-set mortar, and install your flooring.
• Edged with double-sided tape for fast & easy installation that adheres directly to your subfloor.
• Mortar bonds easily through mesh with the underlying material.
• Only 1/8" added floor thickness compared to typical tile installations
• Easily adjusted to accommodate curves, angles, and cut-outs
• Can be trimmed & flipped to accommodate your layout (only cut orange mesh)
• Also available in 2' & 3' wide rolls
Video
Instruction Manual Link
Install Steps
Installation Steps:
|
Step #1 |
Step #2 |
Step #3 |
|
Plan Your Layout |
Roll Out Mat(s) Turn and cut mesh (if needed) to custom fit to your room. Attach mat to subfloor with the built-in tape then mount the SunStat and place floor temperature sensor between 2 heating wires. |
Cover with Mortar Cover mats with a cement based mortar, let it cure, then install your floor covering. If you are installing tile, you can install the tile when you apply the mortar. Connect mat power leads to your thermostat in parallel. |
Minimum Installation Temperature
50 Degrees F / 10 Degrees C
Power Supply & Wiring
| Mats or Wire | Supply Wire | Breaker | |||
| VAC | total amps | (AWG*) | qty | type | rating |
| 120 | up to 12 amps | 14 | 1 | single pole | 15 or 20 A |
| 120 | up to 15 amps | 12 | 1 | single pole | 20 A |
| 240 | up to 12 amps | 14 | 1 | double pole | 15 or 20 A |
| 240 | up to 15 amps | 12 | 1 | double pole | 20 A |
* Recommended only. Follow local codes for wire gauge size.
Maximum Circuit Load
15 Amps
Maximum Circuit Overload Protection
20 A Breaker
Distance from Toilet
Install 4-6" away from the toilet drain wax ring. It can be under the front of toilet - Approximately 20" from wall.
Shower Installation
Yes, can be installed in a tiled shower. UL listed, verify local code.
| UPC | 840213043537 |
|---|---|
| Manufacturer | Watts Radiant |
| Safety Listing | UL (Underwriters Laboratory) Listed for U.S. and Canada under UL 1673 and CAN/CSA C22.2 No. 130-03, File No. E185866 |
| Voltage | 240 VAC |
| Ohms Reading (resistance value) | 29-36 ohms |
| Spacing of Heating Wire | 3" |
| Heated Area Size Covered | 140 |
| Size in Feet | 2.5' x 56' (2.5x56 feet) |
| Size in Inches | 30" x 672" (30x672 inches) |
| Size in Meters | 0.76m x 17.07m (0.76x17.07 meters) |
| Thickness | 0.122 (less than 1/8") |
| Amp Draw | 7 |
| Wattage per SF | 12 |
| Heating Power Output per Hour (BTU) | 41 BTU per Sq Ft/Hour |
| Heating Power Output Total | 5740 BTU total |
| Power Lead Length | 10' |
| Power Lead Type | Armored, NEC color code, Single point connection at 1 corner of mat. No return wire like inferior products |
| Power Lead Wire Gauge | 14 AWG |
| What's In The Box | Classic Mat, Detailed Installation Manual. Installation videos online. |
|---|---|
| Brand Name | SunTouch |
| Warranty from Manufacturer | 25 year warranty backed by USA Manufacturer since 1873 |
| Why Helps | SunTouch = Zero EMFAn emerging issue in the electric radiant heat industry is EMF (electromagnetic field) radiation. SunTouch pioneered and sells only ZERO EMF products constructed with active dual wire EMF-canceling technology. All SunTouch products use a complex wire construction with two heating elements in parallel with an added and patented helical twist to eliminate EMF. Other electric radiant floor heating companies sell single-wire systems that release high levels of EMF when compared to SunTouch. What is EMF? Electromagnetic fields (EMF) come from all electrical appliances, but studies show an average American's daily exposure is less than 1 unit (mG) of EMF. But. when you sit on an unshielded electric radiant floor, you may be exposed to 20, 40, or more times the average daily exposure. This Data comes from Independent testing. Read More Here Is limiting exposure to EMF important? No one is certain. The World Health Organization says the data is inconclusive to date, but continues their research. We provide this EMF information because it is important to some people, not to frighten you or exaggerate any risk. For many years customers have chosen SunTouch Zero EMF systems, but we leave the choice to you after explaining what we do know. |
| EMF (Electro Magnetic Field) | Yes. Verified by Independent Testing Laboratory as ultra low. REET test |
| Acceptable Floor Coverings | Natural Stone,Tile, Laminate, Engineered Woods, Carpet, Vinyl, Linoleum, Solid Hardwood (if you use sleepers) |
| Wire Construction | ETFE Fluoropolymer, metal shield and Outside layer of PEX |
| Length of Heated Area (ft) | 56' |
| Length of Heated Area (in) | 672" |
| Total Watts | 1680 watts |
| Indoor / Outdoor | INTERIOR floor heating Application only. Embedded in Mortar or self leveling concrete only |
Write Your Own Review
Free Shipping on orders over $149
DetailsLOWEST PRICE GUARANTEE
DetailsLive help from our experts
M-F 6am - 5pm PST,
1 866 558 3369
Related Items
Customers also purchased
